Electronic Items & Sport Goods

Men & Women major championships

2009-04-01T01:03:00.000-07:00

Men's major championships

Tiger Woods, the most successful golfer currently playing professional golf.

The major championships are the four most prestigious men's tournaments of the year. In chronological order they are: The Masters, the U.S. Open, The Open Championship (referred to in North America as the British Open) and the PGA Championship.

The fields for these events include the top several dozen golfers from all over the world. The Masters has been played at Augusta National Golf Club in Augusta, Georgia since its inception in 1934. It is the only major championship that is played at the same course each year. The U.S. Open and PGA Championship are played at courses around the United States, while The Open Championship is played at courses in the UK.

The number of major championships a player accumulates in his career has an impact on his stature in the sport. Jack Nicklaus is considered to be the greatest golfer of all time, largely because he has won a record 18 professional majors, or 20 majors in total if his two U.S. Amateurs are included. Tiger Woods, who may be the only golfer in the foreseeable future likely to challenge Nicklaus's record, has won 14 professional majors (17 total if his three U.S. Amateurs are included), all before the age of 33. (To put this total in perspective, Nicklaus had won 11 professional majors and two U.S. Amateurs by his 33rd birthday, and did not win his 15th professional major until he was 35.) Woods also came closest to winning all four current majors in one season (known as a Grand Slam completed first by Bobby Jones) when he won them consecutively across two seasons: the 2000 U.S. Open, Open Championship, and PGA Championship; and the 2001 Masters. This feat has been frequently called the Tiger Slam.

Prior to the advent of the PGA Championship and The Masters, the four Majors were the U.S. Open, the U.S. Amateur, the Open Championship, and the British Amateur. These are the four that Bobby Jones won in 1930 to become the only player ever to have earned a Grand Slam.

Women's major championships

Annika Sörenstam, the most successful female golfer currently playing professional golf.

Women's golf does not have a globally agreed set of majors. The list of majors recognised by the dominant women's tour, the LPGA Tour in the U.S., has changed several times over the years, with the last change in 2001. Like the PGA Tour, the (U.S.) LPGA has four majors: the Kraft Nabisco Championship, the LPGA Championship, the U.S. Women's Open and the Women's British Open. Only the last of these is also recognised by the Ladies European Tour. The other event that it recognises as a major is the Evian Masters, which is not considered a major by the LPGA (but is co-sanctioned as a regular LPGA event). However, the significance of this is limited, as the LPGA is far more dominant in women's golf than the PGA Tour is in mainstream men's golf. For example, the BBC has been known to use the U.S. definition of "women's majors" without qualifying it. Also, the Ladies' Golf Union, the governing body for women's golf in the UK and Republic of Ireland, states on its official website that the Women's British Open is "the only Women's Major to be played outside the U.S." For many years, the Ladies European Tour tacitly acknowledged the dominance of the LPGA Tour by not scheduling any of its own events to conflict with the three LPGA majors played in the U.S., but that changed in 2008, with the LET scheduling an event opposite the LPGA Championship. The second-richest women's tour, the LPGA of Japan Tour, does not recognise any of the U.S. LPGA or European majors as it has its own set of three majors. However, these events attract little notice outside Japan.

Senior major championships

Senior (50-and-over) men's golf does not have a globally agreed upon set of majors. The list of senior majors on the U.S.-based Champions Tour has changed over the years, but always by expansion; unlike the situation with the LPGA, no senior major has lost its status. The Champions Tour now recognises five majors: the Senior PGA Championship, the U.S. Senior Open, the Senior British Open, The Tradition and the Senior Players Championship.

Of the five events, the Senior PGA is by far the oldest, having been founded in 1937. The other events all date from the 1980s, when senior golf became a commercial success as the first golf stars of the television era, such as Arnold Palmer and Gary Player, reached the relevant age. The Senior British Open was not recognised as a major by the Champions Tour until 2003. The European Seniors Tour recognises only the Senior PGA and the two Senior Opens as majors. However, the Champions Tour is arguably more dominant in global senior golf than the U.S. LPGA is in global women's golf.

Hazards and penalties

2009-04-01T00:58:00.000-07:00

Hazards

Bunker

A golfer hitting a ball from a greenside bunker

A bunker is any prepared area from which turf and soil has been removed and replaced with sand. If a ball is in a bunker, the player can play the ball as it lies within the bunker without incurring any penalty strokes. The player can also, under penalty of one stroke, deem the ball unplayable, and drop the ball inside the bunker.(Rule 28). The player can not test the condition of the bunker, nor can he/she touch the ground within the bunker with his/her hand or a club.
The penalty for grounding is two strokes in stroke play, or loss of hole in match play. (Rule 13-4).

Water hazards

A water hazard is any sea, lake, pond, river, creek, ditch or anything of a similar nature on the course. If the ball is in a water hazard, the player may play the ball as it lies or, under penalty of one stroke, play a ball from where it was originally hit; or, under penalty of one stroke, drop a ball at any point along the ball's flight path toward the hazard. (Rule 26-1).

A lateral water hazard is a water hazard so situated that it is not possible or impractical to drop a ball behind the hazard. If the ball is in a lateral water hazard, in addition to the options for a ball in a water hazard, the player may under penalty of one stroke, drop a ball within two club lengths of the point of entry into the hazard; or, under penalty of one stroke, drop a ball on the opposite side of the hazard no closer to the hole. (Rule 26-1).

Penalties

Penalties are incurred in certain situations. They are counted towards a player's score as if they were an extra swing or swings at the ball. Strokes are added for rules infractions, or for hitting one's ball into an unplayable situation. A lost ball or a ball hit out of bounds result in a penalty of one stroke and distance. (Rule 27-1) A one stroke penalty is assessed if a players equipment causes the ball to move, or the removal of a loose impediment causes the ball to move. (Rule 18-2) If a golfer makes a stroke at the wrong ball (Rule 19-2), or hits a fellow golfer's ball with a putt (Rule 19-5), the player incurs a two stroke penalty. Most rule infractions lead to stroke penalties, but also can lead to disqualification. Disqualification could be from cheating, signing for a lower score, or from rules infractions that lead to improper play.

Tennis Ball

2009-04-01T00:54:00.000-07:00

Tennis ball:

A tennis ball is a ball designed for the sport of tennis, approximately 6.7 cm (2.7 in.) in diameter and is normally yellow in color.

Modern balls:
Modern balls are made from rubber mixed with 14 to 18 chemicals to get the proper consistency. Approximately 85% of the ball weight is the rubber/chemical mix. Over 90% of tennis balls are produced in Southeast Asia where the natural resource is abundant. The most expensive ingredient in the ball is the felt, which is adjusted in various ways to produce different properties. Steaming the felt raises its nap to make it fluffier, which increases wind resistance and control (through increased resistance when striking the players' rackets) while reducing bounce and speed. A compact nap causes the ball to skip on hitting the court or a racket.

Pressure-less balls:
Pressure-less balls usually have a stiffer, woodier feel than pressurized balls, and except for the Tretorn brand, do not bounce as high as brand new pressurized balls. Unlike pressurized balls, though, they do not lose bounce over time. In fact, they get bouncier as they get lighter, due to fuzz loss. The balder they get, the more their flight, bounce, and spin response changes from what you would expect of tennis balls.

Standardisation:
Brand new yellow tennis ball on the left, with a used ball, duller and greener in color, on the right
Tennis balls must conform to certain criteria for size, weight, deformation, and bounce criteria to be approved for regulation play. The International Tennis Federation (ITF) defines the official diameter as 65.41-68.58 mm (2.575-2.700 inches). Balls must weigh between 56.0g and 59.4g (1.975-2.095 ounces). Yellow and white are the only colors approved by the United States Tennis Association (USTA) and ITF, and most balls produced are fluorescent yellow (known as "optic yellow") the color first being introduced in 1972 following research demonstrating they were more visible on television. Tennis balls are filled with air and are surfaced by a uniform felt-covered rubber compound. Often the balls will have a number on them in addition to the brand name. This helps distinguish one set of balls from another of the same brand on an adjacent court.

Tennis balls begin to lose their bounce as soon as the tennis ball can is opened and can be tested to determine their bounce. A ball is tested for bounce by dropping it from a height of 100 inches (2.5 m) onto concrete; a bounce between 53 and 58 inches (1.35 - 1.47 m) is acceptable (if taking place at sea-level and 20°C / 68°F; high-altitude balls have different characteristics when tested at sea-level). Modern regulation tennis balls are kept under pressure (approximately two atmospheres) until initially used.

Tennis Racquets

2009-04-01T00:51:00.000-07:00

Modern tennis racquets vary in length, weight, and head size. 21" to 26" is normally a junior's length, while 27" or 27.5" are for stronger and taller adult players. Weights of a racquet also vary between 8 ounces unstrung and 12.5 ounces unstrung. Head size also plays a role in a racquet's qualities. A larger head size generally means more power, and a larger "sweet spot" that is more forgiving on off-center hits. A smaller head size offers more precise control. Head sizes of recent racquets vary between 90 sq. inches and 137 sq. inches as the Pro Staff 6.0 (85 sq. inches) went out of production last year.
Throughout most of tennis' history, racquets heads were around 65 square inches and racquets were made of laminated wood. In the late 1960s, Wilson produced the T2000 steel racquet with wire wound around the frame to make string loops. It was popularized by American top player Jimmy Connors. In 1975, aluminum construction allowed for the introduction of the first "oversized" racquet which was manufactured by Weed. Prince popularized the oversize racquet, which had a head size of approximately 110 square-inches and opened the door for the introduction of racquets having other non-standard head sizes such as midsize 90 square-inches and mid-plus size 95 square-inches. In the early 1980s, "graphite" (carbon fibre) composites were introduced, and other materials were added to the composite, including ceramics, glassfibre, boron, and titanium. The Dunlop Max200G used by John McEnroe from 1983 was an early graphite racquet, along with the very popular Prince "Original" Graphite. Composite racquets are the contemporary standard.
Longer racquets were introduced by Dunlop in order to give additional reach for shots such as the serve and volley where shorter players may be at a disadvantage. Midsize or mid-plus racquets are the general standard for professional players.
Stringing (material, pattern, tension) is an important factor in the performance of a tennis racquet. A few elite players use natural gut, but the vast majority of strings are a nylon or polyester synthetic. Some (American champion Pete Sampras is a prominent example) consider the natural string to be more responsive, providing a better "feel", but synthetic is favored for its much superior durability, consistency, as well as much lower cost. String pattern (the vertical/horizontal grid) is a function of the racquet head size and design. A tighter pattern is considered to deliver more precise control; a more "open" pattern to offer greater potential for power and spin. Modern racquets are marked with a recommended string tension range. The basic rule is that a lower tension creates more power (from a "trampoline" effect) and a higher string tension creates more control (the ball stays on the strings longer, for more "feel" and shot direction.) Double strung tennis racquets were introduced in 1977 and then banned because they permitted excessive spin. A modern version of a legal double strung racquet has been introduced.

Choosing a tennis racquet:
Choosing the right racquet will often boost a player's game. Racquet manufacturers such as Head, Wilson, Prince, Yonex, and Babolat, just to name a few, constantly introduce new lines of racquets each year. Depending on the budget, there are plenty of racquets to choose from; however, choosing the right one for a player's game is the key. There are several guidelines such as grip size, head size, length, flex, string patterns, weight, and balance to take into considerations before making the investment. The best thing to do is to demo different type of racquets to feel the difference before deciding on which one to buy. Most tennis equipment shops provides a demo program for their customers.

Grip size:
Choosing the right size of grip is essential. The grip size is measured as the length of the perimeter of the octagonal cross-section of the handle. Grip sizes 3⅞ and 4 are for juniors where 4¼, 4⅜, 4½, and 4⅝ are for adults. The average size for female is 4¼, while the average size for male is 4⅜. A method for determining the right grip size is to hold the racquet where the palm is on the same bevel as the string face. It should be possible to comfortably fit the index finger of your non-racquet hand into the space created between the ring finger and the palm that is holding the racquet. If there is not enough space for the index finger, then the grip is too small. If there is too much space then the grip is too big. If one is in between two grip sizes, the advice is to pick the smaller one. It is always possible to make the grip bigger by adding an overgrip which will increase the size by 1/16 or half a grip size.

Head size:
Head size is the measure of the hitting area. A midsize racquet has a hitting area of 85–95 square inches, mid-plus 95–105 square inches, and oversize greater than 105 square inches. Bigger head size racquet offer more power and spin, however; they lack maneuverability and stability. Smaller head size racquet offer more control and less power. In general, more accomplished players tend to use mid-size and mid-plus racquet because they can generate more power on their own and need a racquet that they can control their power with. Larger racquets usually appeal more to beginner and intermediate players who are looking for more power and larger sweet spot.

Sports car racing

2009-03-25T08:19:00.000-07:00

Sports car racing

The Audi R8 was one of the most successful sports prototypes ever made, seen here at Road Atlanta.

In sports car racing, production versions of sports cars and/or grand tourers, and sports prototype cars compete within their respective classes on closed circuits. The races are often conducted over long distances, at least 1000 km, and cars are driven by teams of two or three drivers (and sometimes more in the US), switching every few hours. Due to the performance difference between production-based sports cars and purpose-built sports prototypes, one race usually involves several racing classes. In the US the American Le Mans Series (ALMS) was organized in 1999, featuring GT1, GT2, and two prototype classes, LMP1 (Le Mans Prototype 1) and LMP2. Manufacturers such as Audi and Acura/Honda field or support entries in the Prototype class. Another series based on Le Mans began in 2004, the Le Mans Endurance Series, which included four 1000 km races at tracks in Europe. A competing body, Grand-Am, which began in 2000, sanctions its own endurance series the Rolex Sports Car Series.

Famous sports car races include the 24 Hours of Le Mans, the 24 Hours of Daytona, 24 Hours of Spa-Franchorchamps, the 12 Hours of Sebring, and the 1,000-mile (1,600 km) Petit Le Mans at Road Atlanta.

Rallying

2009-03-25T08:18:00.000-07:00

Rallying

A Ford Escort RS Cosworth, driven by Malcolm Wilson on a stage rally.

Rallying, or rally racing, involves two classes of car. The modified Group A, but road legal, production based cars and the Group N Production cars compete on (closed) public roads or off-road areas run on a point-to-point format where participants and their co-drivers “rally” to a set of points, leaving in regular intervals from start points. A rally is typically conducted over a number of 'special stages' of any terrain, which entrants are often allowed to scout beforehand at reduced speeds compiling detailed shorthand descriptions of the track or road as they go. These detailed descriptions are known as 'pace notes'. During the actual rally, the co-driver reads the pace notes aloud (using an in-helmet intercom system) to the driver, enabling them to complete each stage as quickly as possible. Competition is based on lowest total elapsed time over the course of an event's special stages, including penalties.

The top series is the World Rally Championship (WRC), but there also regional championships and many countries have their own national championships. Some famous rallies include the Monte Carlo Rally, Rally Argentina, Rally Finland and Rally GB. Another famous event (actually best described as a "rally raid") is the Paris-Dakar Rally. There are also many smaller, club level, categories of rallies which are popular with amateurs, making up the "grass roots" of motor sports.

Stock car racing

2009-03-25T08:16:00.000-07:00

Stock car racing

Practice for the Daytona 500.

Stock car racing, is hugely popular in the USA and is also widely followed in the UK and Europe. It is the most popular form of racing in the United States

Usually raced on oval tracks made with clay, asphalt, or concrete, stock cars may resemble production cars but are in fact purpose-built racing machines which are built to tight specifications. Early stock cars were actual production vehicles; the car to be raced was often driven from track to track. The modern car however is far removed from the production model which it represents, making the term "stock car" somewhat incorrect.

The largest stock car racing governing body is NASCAR. NASCAR's premier series is the Sprint Cup Series, its most famous races being the Daytona 500 and the Brickyard 400. NASCAR also runs several feeder series. The Nationwide Series, and Camping World Truck Series (a pickup truck racing series) conduct races across the entire continental United States. The NASCAR Canadian Tire Series conducts races across Canada and the NASCAR Corona Series conducts races across Mexico. NASCAR also governs several smaller regional series.

NASCAR also governs the Whelen Modified Tour. Modified cars are best described as hybrids of stock cars and open-wheel cars. They are heavily altered from stock, with powerful engines, large tires, tubular chassis and light bodies. The Whelen Modified tour is NASCAR's oldest series.

A World of Outlaws late model stock car on a dirt track.

There are also other stock car governing bodies, such as Automobile Racing Club of America and United Speed Alliance Racing.

In the UK, British Stock car racing is also referred to as "Short Circuit Racing". This takes place on shale or tarmac tracks - usually around 1/4 mile in length. The governing bodies for the sport are the Oval Racing Council (ORC) and BriSCA. Both bodies are made up of individual stadium promoters. There are around 35 tracks in the UK and upwards of 7000 active drivers. The sport is split into three basic "divisions" - distinguished by the rules regarding car-contact during racing.

Full Contact formulas include Bangers, Bombers and Rookie Bangers - and racing features Demolitions Derbies, Figure of Eight racing and Oval Racing

Semi Contact Formulas include BriSCA F1, F2 and Superstox - where bumpers are used tactically.

Non-contact formulas include National Hot Rods, Stock Rods and Lightning Rods.

UK Stockcar racing started in the 1950s and grew rapidly through the 60s and 70s. Today it remains one of the most popular forms of motorsport in the UK - with regular events attacting substantial crowds to dramatic and intense events.

The major Promoter of Stockcar racing in the UK is Spedeworth/Incarace, with 10 raceways and 250 events each year.

Touring car racing

2009-03-25T08:15:00.000-07:00

Touring car racing

Andy Priaulx leading the World Touring Car Championship 2006 Race 10 in Curitiba.

Touring car racing is a style of road racing that is run with production derived race cars. It often features exciting, full-contact racing due to the small speed differentials and large grids.

The V8 Supercars originally from Australia, British Touring Car Championship, Deutsche Tourenwagen Masters originally from Germany, and the World Touring Car Championship held with 2 non-European races (previously the European Touring Car Championship) are the major touring car championships conducted worldwide, along with a European Touring Cup, a one day event open to Super 2000 specification touring cars from Europe's many national championships.

The Sports Car Club of America's SPEED World Challenge Touring Car and GT championships are dominant in North America while the venerable British Touring Car Championship continues in the United Kingdom. America's historic Trans-Am Series is undergoing a period of transition, but is still the longest-running road racing series in the U.S. The National Auto Sport Association also provides a venue for amateurs to compete in home-built factory derived vehicles on various local circuits.

Single-seater racing

2009-03-25T08:14:00.001-07:00

Single-seater racing

A modern Formula One car: Michael Schumacher's Ferrari at the 2005 United States Grand Prix.

Single-seater (open-wheel) racing is one of the most popular forms of motorsport, with cars designed specifically for high-speed racing. The wheels are not covered, and the cars often have aerofoil wings front and rear to produce downforce and enhance adhesion to the track. In Europe and Asia, open wheeled racing is commonly referred to as "Formula", with appropriate hierarchical suffixes. In North America, the "Formula" terminology is not followed (with the exception of F1). The sport is usually arranged to follow an "international" format (such as F1), a "regional" format (such as the Formula 3 Euro Series), or a "domestic", or county-specific format (such as the German Formula 3 championship, or the British Formula Ford).

The best-known variety of single-seater racing, Formula One, involves an annual World Championship for drivers and constructors of around 18 races a year featuring major international car and engine manufacturers, and independent constructors, such as Ferrari, McLaren, Williams, BMW Sauber, Toyota, Honda, Renault, Red Bull Racing - in an ongoing battle of technology and driver skill and talent. The sport is one of the top five watched sporting events in the world, alongside the FIFA World Cup, the Olympic Games, the Super Bowl and the UEFA European Football Championship. Formula One is, by any measure, the most expensive sport in the world, with some teams spending in excess of $400 million per year. Formula One is widely considered to be the pinnacle of motorsports, with the F1 Drivers' Championship being one of, and the oldest among, only three World Championships awarded each year by the FIA (the others being the World Touring Car Championship and the World Rally Championship). What separates Formula 1 from all other forms of open wheel racing, is the basic premise of F1 revolves around the very important issue that each team is a "constructor". That is, the chassis of the car must be designed and manufactured in-house, and chassis can not be supplied to competitors on a "customer" basis. Engines are usually funded and/or developed by established major motor manufacturers, and can be supplied exclusively to just one team, or may be offered as "customer" engines, often to the smaller, lower-ranked teams.

In North America, the cars used in the National Championship (currently the IndyCar Series, and previously CART) have traditionally been similar though less sophisticated than F1 cars, with more restrictions on technology aimed at controlling costs.

Other international single-seater racing series are the A1 Grand Prix (unofficially often referred to as the "world cup of motorsport"), and the GP2 (formerly known as Formula 3000 and Formula Two). Regional series include Formula Nippon and Formula V6 Asia (specifically in Asia), Formula Renault 3.5 (also known as the World Series by Renault, succession series of World Series by Nissan), Formula Three, Formula Palmer Audi and Formula Atlantic. Domestic, or country-specific series include Formula Three, Formula Renault, Formula Ford with the leading introductory series being Formula BMW.

There are other categories of single-seater racing, including kart racing, which employs a small, low-cost machine on small tracks. Many of the current top drivers began their careers in karts. Formula Ford once represented a popular first open-wheel category for up-and-coming drivers stepping up from karts and now the Formula BMW series is the preferred option as it has introduced an areo package and slicks, allowing the junior drivers to gain experience in a race car with dynamics closer F1. The Star Mazda Series is another entry level series.

Students at colleges and universities can also take part in single seater racing through the SAE Formula Student competition, which involves designing and building a single seater car in a multidisciplinary team, and racing it at the competition. This also develops other soft skills such as teamwork whilst promoting motorsport and engineering.

In 2006, producer Todd Baker was responsible for creating the world's first all-female Formula racing team. The group was an assemblage of drivers from different racing disciplines, and formed for an MTV reality pilot which was shot at Mazda Raceway Laguna Seca.

In December, 2005 the FIA gave approval to Superleague Formula racing, set to debut in 2008. This will be open-wheel, single-seat stock car racing around Grand Prix racetracks. The teams will be owned and run by prominent sports clubs such as AC Milan and FC Porto. The race weekend will follow the GP2 format of Saturday qualifying and two Sunday races, one featuring a reverse grid.

Auto racing

2009-03-25T08:10:00.000-07:00

Auto racing (also known as automobile racing, motor racing or car racing) is a motorsport involving racing cars. It is one of the world's most watched television sports.

Juuso Pykälistö driving a Peugeot 206 World Rally Car at the 2003 Uddeholm Swedish Rally.

Polo

2009-03-25T08:09:00.000-07:00

Polo is a team sport played on horseback in which the objective is to score goals against an opposing team. Riders score by driving a small white plastic or wooden ball into the opposing team's goal using a long-handled mallet. The traditional sport of polo is played at speed on a large grass field up to 300 yards in length, and each polo team consists of four riders and their mounts.

Polo Players by Alex Pacheco.

A modern variant is called arena polo which is played indoors or more commonly outdoors on an enclosed all-weather surface (the field of play is much smaller, rarely exceeding 100 yards in length). In arena polo there are only three players on each team and a small inflatable leather ball is used instead. Arena polo matches usually consist of four 6 minute periods (called chukkas or chukkers), as opposed to field polo matches which consist of between four and eight 7 minutes chukkas (depending on the level being played).

Another modern variant is snow polo, which is played on compacted snow on flat ground or a frozen lake. The format of snow polo varies depending on the space available. Each team generally consists of three players and a bright colored light plastic ball is preferred. Other variants include camel polo, elephant polo, bike polo and Segway polo. These sports are considered as separate sports because of the differences in the composition of teams, equipment, rules, game facilities etc.

Harness racing

2009-03-25T08:08:00.000-07:00

Harness racing is a form of horse-racing in which the horses race in a specified gait. They usually pull two-wheeled carts called sulkies, although races to saddle (trot monté in French) are still occasionally conducted, especially in Europe.

A trotter training at Vincennes hippodrome

Thoroughbred racing

2009-03-25T08:02:00.000-07:00

Thoroughbred horse racing is a worldwide sport and industry involving the racing of thoroughbred horses. It is governed by different national bodies. There are two forms of the sport: flat racing and jump racing. Jump racing can be further divided into hurdling and steeplechasing.

Race at Churchill Downs

Flat racing

Flat races can be run under varying distances and on different terms. Historically, the major flat racing countries were Australia, England, Ireland, France and the United States, but other centres, such as Japan or Dubai, have emerged in recent decades. Some countries and regions have a long tradition as major breeding centers, namely Ireland and Kentucky.

In Europe and Australia, virtually all major races are run on turf (grass) courses, while in the United States dirt surfaces (or, lately, artificial surfaces such as Polytrack) are prevalent. In South America and Asia, both surface types are common.

Jump racing

Jumping races and steeplechases, called National Hunt racing in the United Kingdom and Ireland, are run over long distances, usually from two miles (3200 m) up to four and a half miles (7200 m), and horses carry more weight. Novice jumping races involve horses that are starting out a jumping career, including horses that previously were trained in flat racing. National Hunt racing is distinguished between hurdles races and chases: the former are run over low obstacles and the latter over larger fences that are much more difficult to jump. National Hunt races are started by flag, which means that horses line up at the start behind a tape. Jump racing is popular in the UK, Ireland, France and parts of Central Europe, but only a minor sport or completely unknown in most other regions of the world.

Dressage

2009-03-25T08:00:00.000-07:00

Dressage (pronounced dress-ahhzh /ˈdrɛsɑʒ/) (a French term, most commonly translated to mean "training") is a path and destination of competitive horse training, with competitions held at all levels from amateur to the Olympics. Its fundamental purpose is to develop, through standardized progressive training methods, a horse's natural athletic ability and willingness to perform, thereby maximizing its potential as a riding horse. At the peak of a dressage horse's gymnastic development, it can smoothly respond to a skilled rider's minimal aids by performing the requested movement while remaining relaxed and appearing effortless. Dressage is occasionally referred to as "Horse Ballet" (cf. nl:Dressuur). Although the discipline has ancient roots, dressage was first recognized as an important equestrian pursuit in the West during the Renaissance. The great European riding masters of that period developed a sequential training system that has changed little since then. Classical dressage is still considered the basis of trained modern dressage.

An upper-level dressage competitor performing an extended trot.

Early European aristocrats displayed their horses' training in equestrian pageants, but in modern dressage competition, successful training at the various levels is demonstrated through the performance of "tests" of prescribed series of movements within a standard arena. Judges evaluate each movement on the basis of an objective standard appropriate to the level of the test and assign each movement a score from zero to ten - zero being "not executed" and 10 being "excellent". A score of 9 is considered "very good" and is considered a particularly high mark, while a competitor achieving all 6s (or 60% overall) should be considering moving on to the next level.

Riding

2009-03-25T07:54:00.000-07:00

Equestrianism refers to the skill of riding or driving horses. This broad description includes both use of horses for practical, working purposes as well as recreational activities and competitive sports.

A young rider at a horse show in Australia.

Sport or recreation that consists of riding a horse; specialized equipment is necessary for steering and controlling the horse.

Show jumping

2009-03-25T07:45:00.000-07:00

A youth competitor show jumping in Denmark

Show jumping, also known as "stadium jumping" or "jumpers," is a member of a family of English riding equestrian events that also includes dressage, eventing, hunters and equitation. Jumping classes are commonly seen at horse shows throughout the world, including the Olympics. Sometimes shows are limited exclusively to jumpers, sometimes jumper classes are offered in conjunction with other English-style events, and sometimes show jumping is but one division of very large, all-breed competitions that include a very wide variety of disciplines. Jumping classes may be governed by various national horse show sanctioning organizations, such as the United States Equestrian Federation in the USA. However, international competitions are governed by the rules of the Fédération Équestre Internationale (FEI).

Golf equipment

2009-03-25T07:42:00.000-07:00

Equipment

Golf clubs are used to hit a golf ball. Each club is composed of a shaft with a lance (grip) on the top end and a clubhead on the bottom. Woods, are used for long-distance fairway shots; irons, the most versatile class, are used for a variety of shots, and putters, are used to roll the ball into the cup.

An important variation in different clubs is loft, or the angle between the club's face and the vertical plane. It is loft that makes a golf ball leave the tee on an ascending trajectory, not the angle of swing; virtually all swings contact the ball with a horizontal motion. The impact of the club compresses the ball, while grooves on the clubface give the ball backspin (a clockwise spin when viewed from a parallel standpoint to the left of the ball). Together, the compression and backspin create lift. The majority of woods and irons are labeled with a number; higher numbers indicate shorter shafts and higher lofts, which give the ball a higher and shorter trajectory.

While the variation of clubs can differ greatly between golfers, a set used to play a round of golf must have no more than 14 clubs. A full set typically consists of a driver, two fairway woods (generally 3- and 5-woods), a set of irons from 3 to 9, a pitching wedge, a sand wedge, a putter, and one more club of the player's choice. Many players opt to avoid the long irons (that many find difficult to hit), and replace them with more forgiving clubs, like hybrids.

Golf balls are famous for "dimples". These small dips in the surface of the golf ball decrease aerodynamic drag by increasing turbulence behind the ball in motion, which allows the ball to fly farther. A tee is used for resting the ball on top of for an easier shot; allowed only for the first stroke of each hole. Wood tees are inexpensive but plastic tees last longer. Long tees are suitable for woods and can position the ball higher off the ground. Short tees are suitable for irons and are less easily broken. Many golfers wear golf shoes with metal or plastic spikes designed to increase traction thus allowing for more longer and more accurate shots. A golf bag is used to transport golf clubs. Golf bags have several pockets designed for carrying various equipment and supplies such as tees, balls, and gloves required over the course of a round of golf. Golf bags can be carried, pulled on a two-wheel pull cart or harnessed to a motorized golf cart during play. Golf bags have both a hand strap and shoulder strap for carrying, and sometimes have retractable legs that allow the bag to sit upright when at rest. Golf also uses flags, known as the "pin" to show the position of the hole to players when they are too far away from the hole to see it clearly. When all players in a group are within putting distance, the pin, is removed by a "caddy" or a fellow competitor to allow for easier access to the hole.

Snooker

2009-03-16T06:31:00.000-07:00

Snooker

Snooker player playing a shot with a rest

Snooker is a cue sport that is played on a large baize-covered table with pockets in each of the four corners and in the middle of each of the long side cushions. A regulation (full-size) table is 12 ft × 6 ft (3.6 m x 1.8 m). It is played using a cue and snooker balls: one white cue ball, 15 red balls worth one point each, and six balls of different colours yellow (2 points), green (3), brown (4), blue (5), pink (6) and black (7). A player (or team) wins a frame (individual game) of snooker by scoring more points than the opponent(s), using the cue ball to pot the red and coloured balls. A player wins a match when a certain number of frames have been won.

Snooker, generally regarded as having been invented in India by British Army officers, is particularly popular in many of the English-speaking and Commonwealth countries, with top professional players attaining multi-million pound career earnings from the game.

List of snooker equipment

Chalk: The tip of the cue is 'chalked' to ensure good contact between the cue and the cue-ball.
Cue: A stick, made of wood or fibreglass, the tip of which is used to strike the cue-ball.
Extension: A shorter baton that fits over, or screws into, the back end of the cue, effectively lengthening it. Is used for shots where the cue-ball is a long distance from the player.
Rest: A stick with an X-shaped head that is used to support the cue when the cue ball is out of reach at normal extension.
Hook rest: Identical to the normal rest, yet with a hooked metal end. It is used to set the rest around another ball. The hook rest is the most recent invention in snooker.
Spider: Similar to the rest but with an arch-shaped head; it is used to elevate and support the tip of the cue above the height of the cue-ball.
Swan (or swan-neck spider): This equipment, consisting of a rest with a single extended neck and a fork-like prong at the end, is used to give extra cueing distance over a group of balls.
Triangle/Rack: The piece of equipment is used for gathering the red balls into the formation required for the break to start a frame.
Extended rest: Similar to the regular rest, but with a mechanism at the butt end which makes it possible to extend the rest by up to three feet.
Extended spider: A hybrid of the swan and the spider. Its purpose is to bridge over large packs of reds. Is less common these days in professional snooker but can be used in situations where the position of one or more balls prevents the spider being placed where the striker desires.
Ball marker: A multi-purpose instrument with a 'D' shaped notch, which a referee can (1) place next to a ball, in order to mark the position of it. He can then remove the ball to clean it; (2) use to judge if a ball is preventing a colour from being placed on its spot; (3) use to judge if the cue ball can hit the extreme edge of a "ball on" when awarding a free ball (by placing it alongside the potentially intervening ball).

Pocket billiards

2009-03-16T06:28:00.000-07:00

Time-lapse photo of a player going down to take a shot.

Pocket billiards, most commonly referred to as pool, is the general term for a family of games played on a specific class of billiards table, having 6 receptacles called pockets (or "holes") along the rails, in which balls are deposited as the main goal of play. Cue sports that are played on pocketless tables are generally referred to as carom billiards.

Equipment

Pool Balls

Pocket billiards uses different equipment from carom billiards. Other than the table having pockets, the balls for pocket billiards are generally smaller and range from 2.25 inches (57.15 mm) in diameter to 2.375 inches (60.33 mm) in diameter. (By comparison Carom billiard balls are generally 2.375 inches (60.33 mm), or 61.5 millimetres (2.42 in). While UMB, the International Olympic Committee-recognized world carom billiards authority, permits balls as small as 61.0 millimetres (2.40 in), no major manufacturer produces such balls any longer, and the de facto standard is 61.5 millimetres (2.42 in). Modern pocket billiard tables range in size from 3.5 feet (1.07 m) by 7 feet (2.13 m), to 4.5 feet (1.37 m) by 9 feet (2.74 m). Modern cues are generally 58.5 inches (148.6 cm) long for pocket billiards while cues prior to 1980 were designed for straight pool and had an average length of 57.5 inches (146.0 cm), while carom billiards cues are generally 56 inches (142.2 cm) long.

Carom billiards

2009-03-16T06:21:00.000-07:00

Not to be confused with Carrom.

A carom billiard table and billiard balls.

Carom billiards, sometimes called carambole billiards or simply carambole and, in some cases, used as a synonym for the game of straight rail from which many carom games derive, is the overarching title of a family of billiards games generally played on cloth-covered, 5 by 10 foot (approximately 1.5 × 3 m) pocketless tables, which often feature heated slate beds. At its simplest form, the object of most carom games is to score points or "counts" by caroming one's own cue ball off both the opponent's cue ball and the object ball(s) on a single shot. The invention as well as the exact date of origin of carom billiards is somewhat obscure but is thought to be traceable to 18th century France.

There are a large array of carom billiards disciplines. Some of the more prevalent today and historically are (chronologically by apparent date of invention): straight rail, cushion caroms, balkline, three-cushion billiards and artistic billiards. There are many other carom billiards games, predominantly intermediary or offshoot games combining elements of those already listed, such as the champion's game, an intermediary game between straight rail and balkline, as well as games which are hybrids of carom billiards and pocket billiards, such as English billiards played on a snooker table and its descendant games, American four-ball billiards, and cowboy pool.

Equipment

Cloth

The Family Remy by Januarius Zick, c. 1776, featuring billiards among other parlour activities.

Cloth has been used to cover billiards tables since the 15th century. In fact, the predecessor company of the most famous maker of billiard cloth, Iwan Simonis, was formed in 1453. Most cloth made for carom billiards tables is a type of baize that is dyed green, and is made from 100% worsted wool, which provides a very fast surface allowing the balls to travel with little resistance across the table bed. The green color of cloth was originally chosen to emulate the look of grass, and has been so colored since the 16th century. However, the color also serves a useful function, as humans have a higher light sensitivity to green than to any other color, allowing play for longer periods of time without eye strain.

Balls

A standard set of carom billiards balls (61.5 mm [2⁷⁄₁₆ in] diameter), including a red object ball, a plain white cue ball, and a dotted cue ball for the opponent. Some games use an additional object ball.

Modern billiard balls are made from phenolic resin or other highly resilient plastics, are normally 61.5 mm (2⁷⁄₁₆ in) in diameter, weigh between 205 and 220 grams (7.23 – 7.75 ounces; 7.5 is average), and are significantly larger and heavier than their pocket billiards counterparts. While UMB, the International Olympic Committee-recognized world carom billiards authority, permits balls as small as 61.0 mm (approximately 2³⁄₈), no major manufacturer produces such balls any longer, and the de facto standard is 61.5 mm. The three standard balls in most carom billiards games consist of a completely white cue ball, a second cue ball with typically a red or black dot on it (to aid in differentiation between the two cue balls), and a third, red ball. In some sets of balls, however, the second cue ball is solid yellow. Both types of ball sets are permitted in tournament play.

Billiard balls have been made from many different materials since the start of the game, including clay, wood, ivory, plastics (including celluloid, Bakelite, crystalate, and phenolic resin) and even steel. The dominant material from 1627 until the early- to mid-twentieth century was ivory. The search for a substitute for ivory use was not for environmental concerns but based on economic motivation and fear of danger for elephant hunters. It was in part spurred on by a New York billiard table manufacturer who announced a prize of $10,000 for a substitute material. The first viable substitute was celluloid billiard balls, invented by John Wesley Hyatt in 1868, but the material was volatile and highly flammable, sometimes exploding during manufacture.

Billiard cues

George Sutton tobacco card, c. 1911. The game shown is balkline.

Billiard cues have specialized refinements making them different from the typical pool cue which many people are more familiar with. Such cues tend to be shorter overall, with a shorter ferrule, a fatter butt, a wooden pin joint, a fast taper, and a smaller tip diameter as compared with pool cues. These features make the cue significantly stiffer, which aids in handling the larger and heavier billiard balls as compared with pool cues, but more importantly, act to reduce deflection. Deflection, sometimes called squirt, may be defined as displacement of the cue ball's path away from the parallel line formed by the cue stick's direction of travel. It is a factor that occurs every time english (sidespin) is employed, and its effects are magnified by speed. In some carom billiards games, deflection plays a large role because many shots require extremes of english, coupled with great speed; a combination typically minimized as much as possible, by contrast, in pocket billiards.

Heated slate

The slate bed of billiard tables are often heated to about 5 °C/9 °F above room temperature, which helps to keep moisture out of the cloth to aid the balls rolling and rebounding in a consistent manner, and generally makes a table play faster. A heated table is required under international carom rules and is an especially important requirement for the games of three-cushion billiards and artistic billiards. Heating table beds is an old practice. Queen Victoria of England (1819–1901) had a billiard table that was heated using zinc tubes, although the aim at that time was chiefly to keep the then-used ivory balls from warping. The first use of electric heating was for an 18.2 balkline tournament held in December 1927 between Welker Cochran and Jacob Schaefer, Jr. The New York Times announced it with fanfare: "For the first time in the history of world's championship balkline billiards a heated table will be used..."

Various Guns

2009-03-16T06:06:00.000-07:00

Shotgun

The three Shotgun ISSF shooting events (presently all Olympic) are based on quick reaction to clay targets thrown by a machine.
Other shotgun sports with (at least partial) international recognition include Sporting Clays, providing more variation than the standard ISSF events, and Down-The-Line. Five stand is also a shotgun shooting sport similar to skeet, but with more target variety. There are five stations, or stands. At each station there is normally a card that lets the shooter know the sequence of birds he or she will be shooting at.
Cowboy Action Shooting also may involve shotguns.

Action

Action Shooting is a generic term applicable to non-traditional shooting sports, generally characterized by rapid movement within each shooting stage, where most or all begins with holster draw in the case of handguns. Examples include 'practical pistol' as in the International Practical Shooting Confederation (IPSC), the United States Practical Shooting Association (USPSA) and the International Defensive Pistol Association (IDPA), as well as cowboy action shooting, ActionAirgun (AAG), and 'three-gun' events noted below. The latter two involve use of rifles, handguns, and shotguns within the same event.

However, fast AND accurate shooting as opposed to just fast shooting - requiring less physical movement than IPSC, IDPA, and Cowboy Action Shooting, also belongs to the action shooting category owing to the rapidity of firing and mandatory holster draw. Discipline such as National Rifle Association's Action Pistol, also known as The Bianchi Cup, is one example where extreme accuracy fired within tight, predetermined time limits is more paramount than raw speed.

3-Gun

3-Gun shooting events (not to be confused with NRA 3-gun "Conventional Pistol" events fired with a rimfire, centerfire and .45 caliber pistol) are practical shooting events where the stages are shot with a combination of a rifle, handgun, and/or shotgun. Although 3-gun competitions take place in most local areas, the largest national annual events are the USPSA 3-Gun Nationals, the MGM Ironman, the Rocky Mountain 3-Gun, the DPMS Tri-Gun Challenge, and the Superstition Mountain Mystery 3-Gun.

Submachine gun

sport shooting a Mini Uzi submachine gun at a match in Las Vegas 2005

Submachine Gun competition have been around for over 20 years and are growing in popularity every year.

Handgun Shooting

2009-03-16T06:00:00.000-07:00

Handgun

The six Pistol ISSF shooting events (including four Olympic events) consist of both precision and rapid-fire target shooting from distances of 10, 25, and 50 metres. In the UK it is not possible to practice for some of the Olympic events following the Firearms (Amendment) (No. 2) Act 1997.
Modern pentathlon includes timed shooting with an air pistol as the first of its five parts.
The CISM Rapid Fire match is similar to the ISSF 25 m Rapid Fire Pistol event.
Practical shooting, developed by civilian marksmen and later used as a basis for military and police exercises, is a variation where the shooter often moves during shooting, and hit scores and shooting time are equally important.
PPC 1500, also developed into police exercises, is standard precision shooting, as opposed to practical shooting, but somewhat imitating real-life conditions.
Muzzle loading and Cowboy Action Shooting, as above, also use revolvers.
Metallic silhouette shooting, developed to loosely simulate hunting, is shooting at heavy animal-shaped steel silhouettes that must be knocked down to score, typically at long range using very powerful pistols.
ActionAirgun is an indoor action shooting sport using semi-automatic airsoft pistols and courses of fire downloaded from a central hub. Shooters upload shooting times to a website to resolve competitions.
Here also there are a vast number of nationally recognized sports, including:
- The National Rifle Association (NRA) Conventional Pistol, shot with up to three different handguns, popular in the United States and Canada and also some other countries. This is sometimes termed Bullseye (shooting competition).
- Field shooting, a type of variable rapid-fire competition, popular in Scandinavia.
The Bianchi Cup One of the most lucrative of all shooting sports championships worldwide
Other, less formally organized shooting sports include:
- Knocking bowling pins off a table top,
- Steel "reactive" targets,
- and general "plinking" at miscellaneous objects.

Rifle Shooting

2009-03-16T05:53:00.000-07:00

The shooting sports include those competitive sports involving tests of proficiency (accuracy and speed) using various types of guns such as firearms and airguns (see Archery for more information on shooting sports that make use of bows and arrows). Hunting is also a shooting sport, and indeed shooting live pigeons was an Olympic event (albeit only once, in 1900). The shooting sports are categorized by the type of firearm or target used.

Rifle

Target for 10 m air-rifle (Olympic).

The four Rifle ISSF shooting events (including two Olympic events) consist of long-time target shooting from distances of 10, 50 and 300 m.
The two Running Target ISSF shooting events consist of rapid shooting at a target that moves sideways from distances of 10 and 50 m.
Biathlon is an Olympic sport combining shooting and cross-country skiing.
The CISM Rapid Fire match is a speeded version of the ISSF 300 m Standard Rifle event.
Muzzle loading and Cowboy action shooting are concerned with shooting replica (or antique) guns.
Gallery rifle shooting is popular in the UK and was introduced as a substitute for many pistol shooting disciplines following the 1997 handgun ban.
Benchrest shooting is concerned with shooting small groups with the rifleman sitting on a chair (bench) and the rifle supported from a table. Of all shooting disciplines, this is the most demanding equipment-wise.
High Power Rifle (also known as "Across the Course" or 'traditional' High power) in the United States is a format that shoots 3-position (standing, kneeling or sitting, and prone) at 200, 300, and 600 yards. The term "Across the Course" is used because the match format requires the competitors to shoot at different distances to complete the course of fire.
Fullbore target shooting is concerned with shooting at targets at ranges of 300–1200 yards.
Field Target is an outdoor air gun discipline originating in the United Kingdom, but gaining popularity worldwide.

Sport shooting with air rifles, 10 m.

There are a vast number of nationally recognized sports, including:
- Full bore and small bore, rifle shooting in the United Kingdom.
- Three position airgun competitions, popular in the United States.
- Field shooting, often at very long distances, popular in Scandinavia.
- Running target shooting at 80 m, on a target depicting an elk, popular in Sweden as a hunting exercise.
- Summer biathlon, with skiing replaced by running, popular in Germany.
Military Service Rifle is a shooting discipline that involves the use of rifles that are used by military forces and law-enforcement agencies, both past and present use. Ex-military rifles, sniper rifles (both past and present) and civilian versions of current use service rifles are commonly used in the Military Service Rifle shooting competitions. It is popular in the United States and culminates each year with the National Matches being held at Camp Perry, Ohio. Some countries have outlawed civilian shooting at human-silhouette targets, though. Silhouette targets are not used in the National Match Course of Fire. Bullseye targets are used. High Power Rifle competition often is held at the same events as Service Rifle, such as the U.S. national championships each year at Camp Perry. High Power competitors generally are civilians using whatever rifles they prefer within the rules, whereas Service Rifle entrants are limited to current or previous U.S. armed forces weapons. Although according to NRA rules only certain matches allow optical sights, normally those conducted at ranges over 600 yards.
Palma competition dates from 1876, featuring long-range rifle shooting, out to 1,000 yards. The first Palma match was contested by teams from the U.S. and Ireland (with muzzle loaded rifles at that time), and continues in various nations today.
One other air rifle event is the 3-position (3P), which consists of the standing, kneeling and prone (lying down) positions.
Finally, there is a different air rifle class, not yet in the olympics, called the sporter class. This is where you shoot under strict rules, and are not allowed much of the stiff clothing precision shooters use. You can also get sporter 3P events.

Archery

2009-03-16T05:09:00.000-07:00

Archery is the art, practice or skill of shooting with bow and arrow. Archery has historically been used in hunting and combat and has become a precision sport. A person practicing archery is called an archer or bowman, and one who is fond of or an expert at archery is sometimes called a toxophilite.

Equipment

Types of bows

While there is great variety in the construction details of bows (both historic and modern) all bows consist of a string attached to elastic limbs that store mechanical energy imparted by the user drawing the string. Bows may be broadly split into two categories: those drawn by pulling the string directly and those that use a mechanism to pull the string.

Directly drawn bows may be further divided based upon differences in the method of limb construction, notable examples being self bows, laminated bows and composite bows. Bows can also be classified by the bow shape of the limbs when unstrung; in contrast to simple straight bows, a recurve bow has tips that curve away from the archer when the bow is unstrung. The cross-section of the limb also varies; the classic longbow is a tall bow with narrow limbs that are D-shaped in cross section, and the flatbow has flat wide limbs that are approximately rectangular in cross-section.

A compound bow is a directly-drawn bow designed to reduce the force required at full draw to hold the string taut. Most compound designs use cams or elliptical wheels on the ends of the limbs. The cams on a compound bow are engineered in such a way that the archer can hold twice as much draw weight for an extended period of time. Although the archer starts the draw at full weight, there is a 65%-75% let-off at full draw. For example, a bow set at sixty pounds would allow the archer to draw 60 lb (27 kg) for a short period but hold 65-75% less than that at full draw.

The unique Penobscot bows or double-bows of Wabenaki region (New England and the Canadian Maritimes) are sometimes suggested to be an ancient compound bow. They involved a small bow attached to the back of a larger main bow. This combination results in both substantially increased draw weight for a relatively small main bow, useful for hunting the moose and caribou of the region, and the ability to adjust the draw weight by tensioning the small bow.

Mechanically drawn bows typically have a stock or other mounting, such as the crossbow. They are not limited by the strength of a single archer, and larger varieties have been used as siege engines.

Types of arrows and fletching

A normal arrow consists of a shaft with an arrowhead attached to the front end, with fletchings and a nock at the other. Shafts are usually made of solid wood, fiberglass, aluminum alloy, carbon/alloy composite or carbon fiber. Wooden arrows are prone to warping. Fiberglass arrows are brittle, but are more easily produced to uniform specifications. Aluminum shafts were a very popular high-performance choice in the later half of the 20th century due to their straightness, lighter weight, and subsequently higher speed and flatter trajectories. Carbon fiber arrows became popular in the 1990s and are very light, flying even faster and flatter than aluminum arrows. Today carbon/alloy arrows are the most popular tournament arrows at Olympic Events, especially the Easton X10 and A/C/E.

The arrowhead is the primary functional part of the arrow, and plays the largest role in determining its purpose. Some arrows may simply use a sharpened tip of the solid shaft, but it is far more common for separate arrowheads to be made, usually from metal, stone, or some other hard material. The most commonly used forms are target points, field points, and broadheads, although there are also other types, such as bodkin, judo, and blunt heads.

Shield cut straight fletching - here the hen feathers are barred red

Fletching is traditionally made from bird feathers, but also solid plastic vanes and thin sheetlike spin vanes are used. They are attached near the nock (rear) end of the arrow with thin double sided tape, glue, or, traditionally, sinew. Three fletches is the most common configuration in all cultures, though more may be used. When three-fletched the fletches are equally spaced around the shaft with one placed such that it is perpendicular to the bow when nocked on the string (though with modern equipment, variations are seen especially when using the modern spin vanes). This fletch is called the "index fletch" or "cock feather" (also known as "the odd vane out" or "the nocking vane") and the others are sometimes called the "hen feathers". Commonly, the cock feather is of a different color, traditionally the hens are solid and the cock is barred. However, if archers are using fletching made of feather or similar material they may use same color vanes, as different dyes can give varying stiffness to vanes, resulting in less precision. Also, like-colored fletching and nocks can assist in learning instinctive shooting (i.e. without sights), a technique often preferred by "traditional" archers (shooters of longbows and recurves). When four-fletched often two opposing fletches are cock-feathers and occasionally the fletches are not evenly spaced.

The fletching may be either parabolic (short feathers in a smooth parabolic curve) or shield (generally shaped like one-half of a narrow shield) cut and is often attached at an angle, known as helical fletching, to introduce a stabilizing spin to the arrow while in flight. Whether helicial or straight fletched, when natural fletching (bird feathers) are used it is critical that all feathers come from the same side of the bird. Oversized fletchings can be used to accentuate drag and thus limit the range of the arrow significantly; these arrows are called flu-flus. Misplacement of fletchings can often change the arrow's flight path dramatically.

Bow string

Dacron and other modern materials offer high strength for their weight and are used on most modern bows. Linen and other traditional materials are still used on traditional bows. Almost any fiber can be made into a bow string. The author of "Arab Archery" suggests the hide of a young, emaciated camel. Njál's saga describes the refusal of a wife, Hallgerður, to cut her hair in order to make an emergency bowstring for her husband, Gunnar Hámundarson, who is then killed.

Protective equipment

Finger tab

The traditional bonnet of the Kilwinning Archers of Scotland.

Most archers wear a bracer (also known as an arm-guard) to protect the inside of the bow arm and prevent clothing from catching the bow string. The Navajo people have developed highly-ornamented bracers as non-functional items of adornment. Some archers also wear protection on their chests, called chestguards or plastrons. Roger Ascham mentions one archer, presumably with an unusual shooting style, who wore a leather guard for his face.

The drawing fingers, or thumb in the case of archers using the thumb or Mongolian draw, are normally protected by a leather tab, glove, or thumb ring. A simple tab of leather is commonly used, as is a skeleton glove. Medieval Europeans probably used a complete leather glove.

Eurasiatic archers using the Mongolian draw protected their thumbs, usually with leather according to the author of "Arab Archery", but also with special rings of various hard materials. Many surviving Turkish and Chinese examples are works of considerable art; some are so highly ornamented that they could not have been used to loose an arrow. Presumably these were items of personal adornment. In traditional Japanese archery a special glove is used, provided with a ridge which is used to draw the string.

Release aids

Archers using compound bows usually use a release aid to hold the string steadily and release it precisely. This attaches to the bowstring at the nocking point and permits the archer to release the string by pulling a trigger. The "trigger" may be an actual trigger lever which is depressed by a finger or thumb (or held then released) but it may also be some other mechanism. Hydraulic and mechanical time delay triggers have been used, as have "back tension" triggers which are operated by either a change in the position of the release or "true back tension"; that is to say the release triggers when a pre-determined draw weight is reached. A mechanical release aid permits a single point of contact on the string instead of three fingers. This allows less deformity in the string at full draw, as well as providing a more consistent release than can be achieved by human fingers.

Hitting a golf ball

2009-03-16T04:22:00.000-07:00

The pre-swing

Many golfers' pre-swing looks like this:

Golfers start with the non-dominant side of the body facing the target.
At address the body is positioned parallel to the target line.
The feet are shoulder width apart for middle irons and putters. 2 inches/5 centimeters narrower for short irons and 2 inches/5 centimeters wider for long irons and woods.
The ball is positioned in the center of the players stance for short irons and putters, 1 inch/3 centimeters to the front of the center for middle irons and 1 inch/3 centimeters to the front of the center for long irons and woods.
Most of the weight is on the front foot for short irons, equally on both feet for middle irons and putters, and mostly on the back foot for long irons and woods.
The grip choices that are most commonly used in order of popularity:

The Overlapping Grip: The little finger of the trailing hand (the dominant hand) is placed between the index and middle finger of the lead hand (the non-dominant hand). The lead hand thumb fits along the lifeline of the trailing hand.

The Interlocking Grip: The little finger of the trailing hand is intertwined with the index finger of the lead hand. The lead hand thumb fits in the lifeline of the trailing hand.

The Ten Finger Grip: The little finger of the trailing hand is placed close to the index finger of the lead hand. The lead hand thumb is covered with the lifeline of the trailing hand.

The swing

The full swing

The full golf swing as done by a right handed golfer.

The full golf swing is used in long distance shots or near the green from the fairway. Woods and irons can be used for the full swing. The golfer adjusts his/her swing to fit the circumstances of the play such as distance to the green, lie of the ball and location of the hazards. The face of the club starts on ground (except in sand play in which it is not permitted) square to the target line. For the right-handed golfer, it consists of a "backward swing" to the left, a "forward swing" back to the middle (where the ball is hit), and a "follow-through" back to the left.

The putt

The putt is used for putting the ball in the hole or closer to the hole (as in lagging) from the green or the fringe of the green. The putter is used for the putt. The golfer adjusts his/her putt to fit the circumstances of the play such as distance to the hole and slope of the green. The face of the club starts square to the target line. The club goes straight back and straight through along the same path like a pendulum.

Types of shots

The following are part of the golfer's diverse arsonal of shots:

An approach shot.

A putt is a shot designed to roll the ball along the ground. It is normally made on the putting green using a putter, though other clubs may be used to achieve the same effect in different situations. A lag is a long putt designed less to try to place the ball in the cup than to simply move the ball closer to the hole for an easier putt into the hole.
A chip is a very short lofted shot, generally made with an abbreviated swing motion. Chip shots are used as very short approach shots (generally within 35 yards/32 meters), as a "lay-up" shot to reposition the ball on the fairway, or to get the ball out of a hazard such as a sand trap. This requires a lofted club, usually a wedge.
A pitch or bump and run is a variation of a chip shot, which involves pitching the ball a short distance and allowing the ball to run along the ground with a medium- or high-lofted club using a motion similar to putting.
A punch or knock-down shot is a very low-loft shot of varying distance. It is used to avoid hitting the ball into overhead obstructions, or when hitting into the wind.
A flop shot is when a player opens the club face on a chip shot to get the ball to fly over an obstacle and stop quickly or spin back once it hits the ground.
An approach shot is made with the intention of placing the ball on the green. The term "approach" typically refers to a second or subsequent shot with a shorter-range iron depending on the distance required.
A lay-up shot is made from the fairway after the drive, but intended to travel a shorter distance than might normally be expected and/or with a higher degree of accuracy, due to intervening circumstances. Most often, a lay-up shot is made to avoid hitting the ball into a hazard placed in the fairway, or to position the ball in a more favorable position on the fairway for the next shot.
A drive is a long-distance shot played from the tee, intended to move the ball a great distance down the fairway towards the green.
A draw is when a player shapes a shot from right to left in a curving motion (or left to right for a left-handed player). This occurs when the clubface is closed relative to the swingpath or simply with an inside-out swingpath.
A fade is when a player shapes a shot from left to right in a curving motion (or right to left for a left-handed player). This occurs when the clubface is open relative to the swingpath or simply with an outside-in swingpath.

The following are misplayed shots:

A hook is a shot which moves severely from right to left (or left to right for a left-handed player). More skilled players can hook the ball at will, but most commonly a hook is a misplayed shot that often has negative consequences as a result.
A slice is a shot which moves severely from left to right (or right to left for a left-handed player). More skilled players can slice the ball at will, but most commonly a slice is a misplayed shot that often has negative consequences as a result.
A shank occurs when the club strikes the ball close to hosel of an iron, and thus flies at a sharp angle to the right of the intended direction (or to the left, for a left-handed player). It is often called a "lateral" describing the path of the shot. Shanking can become difficult to stop once started.
A thin shot occurs when the forward edge of the club head strikes the ball too high, causing the shot to come up short of the target.
A fat shot occurs when the forward edge of the club head strikes the ground behind the ball, causing the shot to come up short of the target.
A pop-up occurs when the golf ball strikes too highly on the clubface, sending the ball very high and leaving it well short of its intended target.
A whiff occurs when the golfer swings and misses

Forms of Golf

2009-03-16T04:15:00.000-07:00

Basic forms of golf

Match play

In match play, two players (or two teams) play each hole as a separate contest against each other. The party with the lower score wins that hole, or if the scores of both players or teams are equal the hole is "halved" (tied). The game is won by the party that wins more holes than the other. In the case that one team or player has taken a lead that cannot be overcome in the number of holes remaining to be played, the match is deemed to be won by the party in the lead, and the remainder of the holes are not played. For example, if one party already has a lead of six holes, and only five holes remain to be played on the course, the match is over. At any given point, if the lead is equal to the number of holes remaining, the match is said to be "dormie", and is continued until the leader increases the lead by one hole or ties any of the remaining holes, thereby winning the match, or until the match ends in a tie with the lead player's opponent winning all remaining holes.When the game is tied after the predetermined number of holes have been played, it may be continued until one side takes a one-hole lead.

Stroke play

In stroke play, the score achieved for each and every hole of the round or tournament is added to produce the total score, and the player with the lowest score wins. (Stroke play is the game most commonly played by professional golfers.) If there is a tie after the regulation number of holes in a professional tournament, a playoff takes place between all tied players. Playoffs are either sudden death or employ a pre-determined number of holes, anywhere from three to a full eighteen. In sudden death, a player who scores lower on a hole than all of his opponents wins the match. If at least two players remain tied after such a playoff using a pre-determined number of holes, then play continues in sudden death format, where the first player to win a hole wins the tournament.

Other forms of golf

Skins

In a skins game, golfers compete on each hole, as a separate contest. Played for prize money on the professional level or as a means of a wager for amateurs, a skin, or the prize money assigned to each hole, carries over to subsequent holes if the hole is tied (or halved). If you come to the end of the round and there are still skins left over, play continues until the final skin has been decided.

Stableford scoring

In stableford the player gains points for the score achieved on each hole of the round or tournament (1 point for a bogey, 2 points for a par, 3 points for a birdie, 4 points for an eagle). The points achieved for each hole of the round or tournament is added to produce the total points score, and the player with the highest score wins.

Team play

A foursome (defined in Rule 29) is played between two teams of two players each, in which each team has only one ball and players alternate playing it. For example, if players A and B form a team, A tees off on the first hole, B will play the second shot, A the third, and so on until the hole is finished. On the second hole, B will tee off (regardless who played the last putt on the first hole), then A plays the second shot, and so on. Foursomes can be played as match play or stroke play.

A four-ball (Rules 30 and 31) is also played between two teams of two players each, but every player plays his/her own ball and for each team, the lower score on each hole is counted. Four-balls can be played as match play or stroke play.

There are also popular unofficial variations on team play:

In scramble (also known as ambrose), each player in a team tees off on each hole, and the players decide which shot was best. Every player then plays his/her second shot from within a clublength of where the best ball has come to rest, and the procedure is repeated until the hole is finished. In a champagne scramble, each player in a team tees off on each hole. The best drive is used and all players play their own ball from this spot. In best ball, each player plays the hole as normal, but the lowest score of all the players on the team counts as the team's score.

In a greensome, also called modified alternate shot, both players tee off, and then pick the best shot as in a scramble. The player who did not shoot the best first shot plays the second shot. The play then alternates as in a foursome.

A variant of greensome is sometimes played where the opposing team chooses which of their opponent's tee shots the opponents should use. The player who did not shoot the chosen first shot plays the second shot. Play then continues as a greensome.

There is also a form of starting called shotgun, which is mainly used for tournament play. A shotgun start consists of groups starting on different holes, allowing for all players to start and end their round at the same time.

Handicap systems

A handicap is a numerical measure of an amateur golfer's ability to play golf over the course of 18 holes. Handicaps can be applied either for stroke play competition or match play competition. In either competition, a handicap generally represents the number of strokes above par that a player will achieve on an above average day (i.e., when playing well).

In stroke play competition, the competitor's handicap is subtracted from their total "gross" score at the end of the round, to calculate a "net" score against which standings are calculated. In match play competition, handicap strokes are assigned on a hole-by-hole basis, according to the handicap rating of each hole (which is provided by the course). The hardest holes on the course receive the first handicap strokes, with the easiest holes receiving the last handicap strokes.

Calculating a handicap is often complicated, but essentially it is representative of the average over par of a number of a player's previous above average rounds, adjusted for course difficulty. Legislations regarding the calculation of handicaps differs among countries. For example, handicap rules may include the difficulty of the course the golfer is playing on by taking into consideration factors such as the number of bunkers, the length of the course, the difficulty and slopes of the greens, the width of the fairways, and so on.

Handicap systems are not used in professional golf. Professional golfers often score several strokes below par for a round and thus have a calculated handicap of 0 or less, meaning that their handicap results in the addition of strokes to their round score. Someone with a handicap of zero or less is often referred to as a scratch golfer.

Golf

2009-03-04T23:52:00.000-08:00

Golf is a sport in which players using many types of clubs including woods, irons, and putters, attempt to hit balls into each hole on a golf course in the lowest possible number of strokes. Golf is one of the few ball games that does not use a standardized playing area; rather, the game is played on golf "courses", each one of which has a unique design and typically consists of either 9 or 18 holes. Golf is defined in the Rules of Golf as "playing a ball with a club from the teeing ground into the hole by a stroke or successive strokes in accordance with the Rules"

The first game of golf for which records survive was played at Bruntsfield Links, in Edinburgh, Scotland, in A.D. 1456, recorded in the archives of the Edinburgh Burgess Golfing Society, now The Royal Burgess Golfing Society. The modern game of golf spread from Scotland and has now become a worldwide game, with golf courses in the majority of affluent countries.

Golf competition is generally played as stroke play, in which the individual with the lowest number of strokes is declared the winner, or as match play with the winner determined by whichever individual or team posts the lower score on the most individual holes during a complete round.

Golf as a spectator sport has become increasingly popular, with several different levels of professional and amateur tours in many regions of the world. Players such as Tiger Woods, Jack Nicklaus, Arnold Palmer, Lorena Ochoa and Annika Sörenstam have become well-recognized sports figures across the world. Sponsorship has also become a huge part of the game and players often earn more from their sponsorship contracts than they do from the game itself.

Popularity

Golf course in Goa, on the western coast of India.

In 2005, Golf Digest calculated that there were nearly 31,900 go

lf courses in the world, approximately half of them in the United States. The countries with most golf courses per capita, starting with the best endowed were: Scotland, New Zealand, Australia, Rebublic of Ireland, Northern Ireland, Canada, Wales, United States, Sweden, and England (countries with fewer than 500,000 people were excluded). Apart from Sweden, all of these countries have English as the majority language, but the number of courses in new territories is increasing rapidly. For example, the first golf course in the People's Republic of China opened in 1984, but by 2008 there were 376 courses in that country.

In the United States, the number of people who play golf 25 times or more per year fell from 6.9 million in 2000 to 4.6 million in 2005, according to the National Golf Foundation. The NGF reported that the number who played golf at all fell from 30 million to 26 million over the same period.

The professional sport was initially dominated by Scottish then English golfers, but since 1918, The United States has produced the greatest quantity of leading professionals. Other Commonwealth countries such as Australia and South Africa are also traditional powers in the sport. Since around the 1970s, Japan, Scandinavian and other Western European countries have produced leading players on a regular basis. The number of countries with high-class professionals continues to increase steadily, especially in East Asia. South Korea is notably strong in women's golf.

Golf course

The famous 17th hole of the TPC at Sawgrass

Stadium Course.

Golf is played in an area of land designated a golf course. A course consists of a series of holes, each with a teeing area, fairway, rough and other hazards, and the green with the pin (flagstick) and cup. Different levels of grass are varied to increase difficulty or to allow for putting in the case of the green. A typical golf course consists of eighteen holes, but many smaller courses may only have nine.

Early Scottish golf courses, and similarly designed courses, are mostly laid out on linksland, soil covered sand dunes directly inland from beaches. This gave rise to the common description of a seaside course as a golf links. The turn of the 20th century, with its widespread use of heavy earth-moving equipment, saw a movement toward golf course design with an emphasis on reshaping the land to create hazards, and add strategic interest. Modern golf course design has seen a return to its roots. Architects appreciate once again how to maximize the subtleties in the existing land while tempering how much soil they move.

Environmental concerns over the use of land for golf courses have grown over the past fifty years. Specific issues include the amount of water and chemical pesticides and fertilizers used for maintenance, as well as the destruction of wetlands and other environmentally important areas during construction. The UN estimates that golf courses use about 2.5 billion gallons/9.5 billion liters of water daily. If potable, this amount of water would be enough to provide drinking water for 4.7 billion people. Many golf courses in the world are irrigated with non-potable water and/or rainwater. As a result of these concerns there has been research into more environmentally sound practices and turf grasses.

Play of the sporty

Every round of golf is based on playing a number of holes in a given order. A round typicall consists of 18 holes that are played in the order determined by the course layout. On a nine-hole course, a standard round consists of two successive nine-hole rounds. Playing a hole on the golf course consists of hitting a ball from a tee on the teeing box (a marked area designated for the first shot of a hole, a tee shot), and once the ball comes to rest, striking it again. This process is repeated until the ball is in the cup. Once the ball is on the green (an area of finely cut grass) the ball is usually putted (hit along the ground) into the hole. The goal of resting the ball in the hole in as few strokes as possible may be impeded by hazards, such as bunkers and water hazards. In most typical forms of gameplay, each player plays his/her until it is holed.

Players can walk or drive in motorized carts over the course, either singly or with others, sometimes accompanied by caddies who carry and manage the players' equipment and give them advice.

Par

A hole is classified by its par; the number of strokes a skilled golfer should require to complete play of the hole.For example, a skilled golfer expects to reach the green on a par-four hole in two strokes (This would be considered a Green in Regulation or GIR): one from the tee (the "drive") and another, second, stroke to the green (the "approach"); and then roll the ball into the hole in two putts for par. A golf hole is either a par-three, -four or -five sometimes -six rarely -two and -seven.

The key factor for classifying the par of a hole is the tee-to-green distance. A typical length for a par-three hole ranges between 91-224 meters/100–250 yards; for a par-four hole, between 225-434 meters/251–475 yards; and for a par-five hole, between 435 and 630 meters/476–690 yards. The slope of the course (uphill or downhill) can also effect the par rating. If the tee-to-green distance on a hole is predominantly downhill, it will play shorter than its physical length and may be given a lower par rating and the opposite is true for uphill holes. Par ratings are also affected by factors such as the placement of hazards or the shape of the green which can sometimes effect the play of a hole such that it requires an extra stroke to avoid playing into hazards.

Eighteen hole courses may have four par-three, ten par-four, and four par-five holes, though other combinations exist and are not less worthy than courses of par 72. Many major championships are contested on courses playing to a par of 70, 71, or 72. In some countries, courses are classified, in addition to the course's par, with a course classification describing the play difficulty of a course and may be used to calculate a golfer's playing handicap for that given course (c.f. golf handicap).

Scoring

In every form of play, the goal is to play as few strokes per round as possible. Scores for each hole can be described as follows:

Term on scoreboard	Specific term	Definition
-4	Condor	four strokes under par
-3	Albatross	three strokes under par
-2	Eagle	two strokes under par
-1	Birdie	one stroke under par
0	Par	strokes equal to par
+1	Bogey	one stroke over par
+2	Double Bogey	two strokes over par
+3	Triple Bogey	three strokes over par

Equipment

Professional golf

The majority of professional golfers work as club or teaching professionals (pros), and only compete in local competitions. A small elite of professional golfers are "tournament pros" who compete full time on international "tours". Many club and teaching professionals working in the golf industry start as caddies or a general interest in the game, finding employment at golf courses and eventually moving on to certifications in their chosen profession. These programs include independent institutions and universities, and those that eventually lead to a Class A golf professional certification.

Golf tours

There are at least twenty professional golf tours, each run by a PGA or an independent tour organization, which is responsible for arranging events, finding sponsors, and regulating the tour. Typically a tour has "members" who are entitled to compete in most of its events, and also invites non-members to compete in some of them. Gaining membership of an elite tour is highly competitive, and most professional golfers never achieve it.

The most widely known tour is the PGA Tour, which tends to attract the strongest fields, outside the four Majors and the three World Golf Championships events. This is due mostly to the fact that most PGA Tour events have a first prize of at least US$800,000. The European Tour, which attracts a substantial number of top golfers from outside North America, ranks second to the PGA Tour in worldwide prestige. Some top professionals from outside North America play enough tournaments to maintain membership on both the PGA Tour and European Tour.

The other leading men's tours include the Japan Golf Tour, the Asian Tour (Asia outside Japan), the PGA Tour of Australasia, and the Sunshine Tour (for Southern Africa, primarily South Africa). These four tours, along with the PGA and European Tours, are full members of the trade body of the world's main tours, the International Federation of PGA Tours. Two other tours, the Canadian Tour and the Tour de las Américas (Latin America), are associate members of the Federation. All of these tours, except for the Tour de las Américas, offer points in the Official World Golf Rankings to golfers who make the cut in their events.

Golf is unique in having lucrative competition for older players. There are several senior tours for men 50 and older, the best known of which is the U.S.-based Champions Tour.

There are six principal tours for women, each based in a different country or continent. The most prestigious of these is the United States based LPGA Tour.

All of the leading professional tours for under-50 players have an official developmental tour, in which the leading players at the end of the season will earn a tour card on the main tour for the following season. Examples include the Nationwide Tour, which feeds to the PGA Tour, and the Challenge Tour, which is the developmental tour of the European Tour. The Nationwide and Challenge Tours also offer Official World Golf Rankings points.

Fencing

2009-03-04T23:38:00.000-08:00

Fencing is the sport of armed combat involving cutting, stabbing, or slapping bludgeoning weapons directly manipulated by hand, rather than shot, thrown or positioned, of European origin. Examples include swords, knives, pikes, bayonets, batons, clubs, and similar weapons. In contemporary common usage, fencing tends to refer specifically to European schools of swordsmanship and to the modern Olympic sport that has evolved out of them. It has Spanish origins.

Fencing is one of the four sports which has been featured at every modern Olympic Games. Currently, three types of weapon are used in Olympic fencing:

Foil — a light thrusting weapon; the valid target is restricted to the torso; double touches are not allowed (see priority rules below).
Épée — a heavy thrusting weapon; the valid target area covers the entire body; double touches are allowed.
Sabre — a light cutting and thrusting weapon; the valid target area includes almost everything above the waist (excluding the back of the head and the hands); double touches are not allowed (see priority rules below).

The word fence was originally a shortening of the Middle English defens, that came from an Italian word, defensio, in origin a Latin word. The first known use of defens in reference to English swordsmanship is in William Shakespeare's Merry Wives of Windsor: "Alas sir, I cannot fence."

Forms of fencing

Contemporary fencing is divided in three broad categories:

Competitive fencing
Fencing as a Western martial art
Other forms of fencing

Competitive fencing

Russian Igor Tourchine and American Weston Kelsey fence in the second round of the Men's Individual Épée event in the 2004 Summer Olympics at the Helliniko Fencing Hall on August 17, 2004.

There are numerous inter-related forms of competitive fencing in practice, all of which approach the activity as a sport, with varying degrees of connectedness to its historic past.

Olympic fencing (or simply "fencing") refers to the fencing seen in most competitions, including the Olympic Games and the World Cup. Competitions are conducted according to rules laid down by the Fédération Internationale d'Escrime (FIE), the international governing body. These rules evolved from a set of conventions developed in Europe between mid 17th and early 20th century with the specific purpose of regulating competitive activity. The three weapons used in Olympic fencing are foil, épée, and sabre. In competition, the validity of touches is determined by the electronic scoring apparatus, so as to minimize human error and bias in refereeing.

Wheelchair fencing, an original Paralympic sport, was developed in post-World War II England. Minor modifications to the FIE rules allow disabled fencers to fence all three weapons. The most apparent change is that each fencer sits in a wheelchair fastened to a frame. Footwork is replaced by torso or arm movement, depending on the fencer's disability. The proximity of the two fencers tends to increase the pace of bouts, which require considerable skill. The weapons are identical to those used in Olympic fencing. The youngest wheelchair fencing champion in the history of the sport, is named George Kenneth Robinson IV, also known as Kenny. He was in third grade and originally hails from England.

Other variants include one-hit épée (one of the five events which constitute modern pentathlon) and the various types of competitive fencing, whose rules are similar but not identical to the FIE rules. One example of this is the American Fencing League (distinct from the United States Fencing Association): the format of competitions is different, there is no electronic scoring, and the priority rules are interpreted in a different way. In a number of countries, the accepted practice at school and university level deviates slightly from the FIE format.

Fencing as a Western martial art

Historical Fencing

Some practitioners of fencing approach it as a Western martial art, with the goal being to train for a theoretical duel. The element of sport is absent (or nearly so) from these forms of fencing, but they all share a common origin with each other and with competitive fencing.

Classical fencing is differentiated from competitive fencing as being theoretically closer to swordplay as a martial art. Those who call themselves classical fencers may advocate the use of what they see as more authentic practices, including little or no emphasis on sport competition. There is strong interest within the classical fencing community in reviving the European fencing practices of the 19th and early 20th century, when fencers were expected to be able to fight a duel using their training. Weapons used are the standard (non-electric) foil, standard épée (often equipped with pointes d'arret), and the blunted dueling sabre. AFL fencing is often referred to as classical fencing, but this is a misnomer.

Historical fencing is a type of historical martial arts reconstruction based on surviving texts and traditions. Predictably, historical fencers study an extremely wide array of weapons from different regions and periods. They may work with bucklers, daggers, polearms, navajas, bludgeoning weapons, etc. One main preoccupation of historical fencers is with weapons of realistic weight, which demand a different way of manipulating them from what is the norm in modern Fencing. For example, light weapons can be manipulated through the use of the fingers (more flexibility), but more realistically-weighted weapons must be controlled more through the wrist and elbow. This difference is great and can lead to drastic changes even in the carriage of the body and footwork in combat. There is considerable overlap between classical and historical fencing, especially with regard to 19th-century fencing practices.

Other forms of fencing

This circa 1900 painting illustrates a typical mensur bout in Heidelberg, Germany. The combatants begin the mensur from a static position, either in the "verhängte Auslage" (hanging guard) or in the "steile Auslage" (steep ward), with their swords high in the air. While neck, arms and torso are protected with thickly padded leather gear and, more recently mail shirts, the head typically remains uncovered except for the "Paukbrille", metal goggles to protect the eyes and nose. Different sets of rules (Comments) regulating the Mensur in different cities may admit additional protective gear for lower face, ears, or existing scars.

Finally, there are several other forms of fencing which have little in common besides history with either of the other two classifications.

Academic fencing, or mensur, is a German student tradition that has become mostly extinct but is still sometimes practiced in Germany, Switzerland and Austria as well as in Flanders and Latvia. The combat, which uses a cutting weapon known as the schläger, uses sharpened blades and takes place between members of student corporations - "Studentenverbindungen" - in accordance with a strictly delineated set of conventions. It uses special protective gear that leaves most of the head and face, excluding the eyes, unprotected. (The special goggles are called Paukbrille.) The ultimate goal is to develop personal character, therefore there is no winner or loser and flinching is not allowed. Acquiring a proper cut on the face with the sharp blade, called a Schmiss (German for "smite"), was considered a visible sign of manly courage and status as "Akademiker", or member of the professional upper class. However, tales of cuts being intentionally manipulated by sewing in horsehairs or rubbing wounds with vinegar or salt have been discredited as popular myths since the 1880s.

Stage fencing seeks to achieve maximum theatrical impact in representing a wide range of styles, including both modern and historical forms of fencing. Theatrical fight scenes are choreographed by a Fight Director, and fencing actions are exaggerated for dramatic effect and visual clarity.

Recreational roleplaying often incorporates fencing in the context of historical or fantasy themes in the Society for Creative Anachronism or live-action roleplaying games. Technique and scoring systems vary widely from one group to the next, as do the weapons. Depending on local conventions, participants may use modern sport fencing weapons, period weapons, or weapons invented specifically for the purpose, such as boffers.

Modern weapons

Three weapons survive in modern competitive fencing: foil, épée, and sabre. The spadroon and the heavy cavalry-style sabre, both of which saw widespread competitive use in the 19th century, fell into disfavour in the early 20th century with the rising popularity of the lighter and faster weapon used today. The singlestick was featured in the 1904 Olympic Games, but it was already declining in popularity at that time. Bayonet fencing experienced a somewhat slower decline, with competitions organized by some armed forces as late as the 1940s and 1950s.

While the weapons fencers use differ in shape and purpose, their basic construction remains similar across the disciplines. Every weapon has a blade and a hilt. The tip of the blade is generally referred to as the point. The hilt consists of a guard and a grip. The guard (also known as the coquille, the bell, or the bellguard) is a metal shell designed to protect the fingers. The grip is the weapon's actual handle. There are a number of commonly used variants. The more traditional kind are approximately straight and terminate with a pommel (a heavy nut intended to act as a counterweight for the blade). In the case of foil and épée, these have been surpassed in popularity by a variety of ergonomic designs, often collectively refereed to as pistol grip (the way they are held resembles how one holds a pistol). All of the weapons used for modern competition have electrical wiring which allows them to register a touch on the opponent.

Foil

Valid target at foil - the torso, and the portion of the bib 1.5-2cm below chin level.

The foil is a light and flexible weapon, originally developed in the mid 17th century as a training weapon for the small sword, a light one-handed sword designed almost exclusively for thrusting.

In modern competitive fencing, 'electric' weapons are used. These have a push-button on the point of the blade, which allows hits to be registered by the electronic scoring apparatus. In order to register, the button must be depressed with a force of at least 4.90 newtons (500 grams-force) for at least 15 milliseconds. Foil fencers wear conductive (lamé) jackets covering their target area, which allow the scoring apparatus to differentiate between on- and off-target hits.

The target area is restricted to the torso, including the front and back. When fencing with electrical equipment, there is an area around each armpit that is not covered by the lamé, and is thus effectively not legal target as well.

A modification in FIE rules from 1 January 2009 onwards means that the valid target area includes that part of the bib below a straight line drawn between the shoulders; prior to this, the bib of the mask was not a valid target. This rule has not been implemented uniformly in all National fencing organizations. For instance, the USFA has not decided on a timetable for adopting the rule, while the European nations have generally decided on September 1 2009 as the date for all competitions to use the new rule.

The target must be hit with the tip of the foil; a touch with any other part of the foil it has no effect whatsoever and fencing continues uninterrupted. A touch on an off-target area stops the bout but does not score a point. Foil fencing also features rules of right of way or priority, which determine which fencer's hit will prevail when both fencers have hit. The basic principle of priority is that the hit of the fencer who begins an offensive action first will prevail over his/her opponent's hit, unless the action of the former fails. A fencer's action fails when it falls short of his/her opponent, when it misses, or when it is parried. When one fencer's action fails, the other's current or next offensive action gains priority, unless they delay too long (longer than one period of "fencing time", the time taken to perform one action at the current tempo of the exchange), in which case the previously defending fencer loses priority. If priority cannot be determined when both fencers have hit each other, no point is awarded. The original idea behind the rules of foil fencing was to encourage fencers to defend and attack vital areas, and to fight in a methodical way with initiative passing back and forth between the combatants, thus minimizing the risk of a double death.

When an exchange ends in a hit, the referee will call "halt", and fencing will cease. The referee will then analyse the exchange and phrase it in official terminology. The first offensive action is called the attack. All defensive actions successfully deflecting an opponent's blade are called parries. The first offensive action preceded by a parry is called a beat-attack. An offensive action of a parrying fencer directly following the parry is called a riposte. An offensive action of a fencer, who attacks without first withdrawing the arm directly after being parried, is called a remise. An offensive action of a fencer from the on-guard position, after being parried and then returning to the on-guard position, is called a reprise. An offensive action of a fencer after his/her opponent has lost the right to riposte via inaction is called a redouble. An offensive action begun by a fencer who is being attacked by his/her opponent is called a counter-attack.

Épée

Valid target area at Épée (the entire body).

Épée, as the sporting weapon known today, was invented in the second half of the 19th century by a group of French students, who felt that the conventions of foil were too restrictive, and the weapon itself too light; they wanted an experience closer to that of an actual duel (although the effect is now the opposite as the épée is very slow in comparison). At the point of its conception, the épée was, essentially, an exact copy of a small sword but without the needle-sharp point. Instead, the blade terminated in a point d'arrêt, a three-pronged contraption, which would snag on the clothing without penetrating the flesh.

Like the foil, the épée is a thrusting weapon: to score a valid hit, the fencer must fix the point of his weapon on his opponent's target. However, the target area covers the entire body, and there are no rules regarding who can hit when (unlike in foil and sabre, where there are priority rules). In the event of both fencers making a touch within 40 milliseconds of each other, both are awarded a point (a double hit), except when the score is equal and the point would mean the win for both, such as in modern pentathlon's one-hit épée, where neither fencer receives a point. Otherwise, the first to hit always receives the point, regardless of what happened earlier in the phrase. Also epee's are the heaviest of the weapons. However, with today's techniques, we see some epee blades as light as 150g. An epee is composed of a blade, a point, a bell guard, and a handle or grip (french or pistol grip).

The 'electric' épée, used in modern competitive fencing, terminates in a push-button, similar to the one on the 'electric' foil. In order for the scoring apparatus to register a hit, it must arrive with a force of at least 7.35 newtons (750 grams-force) (a higher threshold than the foil's 4.9 newtons), and the push-button must remain fully depressed for 1 millisecond. All hits register as valid, unless they land on a grounded metal surface, such as a part of the opponent's weapon, in which case they do not register at all. At large events, grounded conductive pistes are often used in order to prevent the registration of hits against the floor. At smaller events and in club fencing, it is generally the responsibility of the referee to watch out for floor hits. These often happen by accident, when an épéeist tries to hit the opponent's foot and misses. This results in a pause in the action but no points. However, deliberate hits against the floor are treated as "dishonest fencing," and penalized accordingly.

Sabre

Valid target at sabre (everything above the waist, excepting the hands and the back of the head).

Sabre is the 'cutting' weapon: points may be scored with edges and surfaces of the blade, as well as the point. Although the current design with a light and flexible blade (marginally stiffer than a foil blade which bends easily up and down while a sabre blade bends easier side to side) appeared around the turn of the 19th and 20th century, similar sporting weapons with more substantial blades had been used throughout the Victorian era.

There is some debate as to whether the modern fencing sabre is descended from the cavalry sabres of Turkic origin, which became popular in Central and Western Europe around the time of Napoleonic Wars, or one of Europe's indigenous edged duelling weapons, such as the cutting rapier. In practice, it is likely to be a hybrid of the two. Most of the conventions and vocabulary of modern sabre fencing were developed by late 19th and early 20th century masters from Italy and Hungary, perhaps most notable among them being Italo Santelli (1866–1945).

The sabre target covers everything above the waist, except the hands (wrists are included) and the back of the head. Today, any contact between any part of the blade and any part of the target counts as a valid touch. This was not always the case, and earlier conventions stipulated that a valid touch must be made with either the point or one of the cutting edges, and must arrive with sufficient force to have caused a palpable wound, had the weapon been sharp. These requirements had to be abandoned, because of technical difficulties, shortly after electronic scoring was introduced into sabre fencing in late 1980s.

Like foil, sabre is subject to right of way rules, but there are some differences in the precise definition of what constitutes a correctly executed attack and parry. These differences, together with a much greater scoring surface (the whole of the blade, rather than the point alone), make sabre parries more difficult to execute effectively. As a result, sabre tactics rely much more heavily on footwork with blade contact being kept to a minimum.

Protective clothing

Jacket

Glove

Plastron

Breeches

Mask

The clothing which is worn in modern fencing is made of tough cotton or nylon. Kevlar was added to top level uniform pieces (jacket, breeches, underarm protector, lamé, and the bib of the mask) following the Smirnov incident at the 1982 World Championships in Rome. However, kevlar breaks down in chlorine and UV light, so the act of washing one's uniform and/or hanging it up in the sun to dry actually damaged the kevlar's ability to do the job.

In recent years other ballistic fabrics such as Dyneema have been developed that perform the puncture resistance function and which do not have kevlar's weakness. In fact, the FIE rules state that the entirety of the uniform (meaning FIE level clothing, as the rules are written for FIE tournaments) must be made of fabric that resists a force of 800 newtons (1600N in the mask bib).

The complete fencing kit includes the following items of clothing:

Form-fitting jacket covering groin and with strap (croissard) which goes between the legs (note that in sabre fencing, jackets that are cut along the waist and exclude the groin padding are also sometimes used), a small gorget of folded fabric is also sewn in around the collar to prevent a blade from slipping upwards towards the neck.
Under-arm protector (plastron) which goes underneath the jacket and provides double protection on the sword arm side and upper arm. It is required to not have a seam in the armpit, which would line up with the jacket seam and provide a weak spot.
One glove for the sword arm with a gauntlet that prevents blades from going up the sleeve and causing injury, as well as protecting the hand and providing a good grip
Breeches or knickers which are a pair of short trousers. The legs are supposed to hold just below the knee.
Knee-length or Thigh high socks which should cover knee and thighs.
Shoes with flat soles and reinforcement on the inside of the back foot and heel of front foot, to prevent wear from lunging.
Mask, including a bib which protects the neck. The mask can usually support 350 Newtons, however FIE regulation masks must withstand much more, 1600 Newtons. Some modern masks have a see-through visor in the front of the mask. These can be used at high level competitions (World Championships etc.).
Plastic chest protector, mandatory for female fencers. While male versions of the chest protector are also available, they were, until recently, primarily worn by instructors, who are hit far more often during training than their students. Since the change of the depression timing (see above), these are increasingly popular in foil, as the hard surface increases the likelihood of point bounce and thus a failure for a hit to register. Plastrons are still mandatory, though and the chest protector must be worn next to the skin.
Fencing Masters will often wear a heavier protective jacket, usually reinforced by plastic foam to cushion the numerous hits an instructor has to endure. Sometimes in practice, masters wear a protective sleeve or a leg leather for protection of their fencing arm or leg.

Electric Fencing-In electric foil and sabre there is a layer of electrically conductive material (called a lamé) worn over the fencing jacket, and entirely covers the valid target area. In foil the lamé is sleeveless, and in sabre the lamé has sleeves and ends in a straight line across the waist. In all weapons, a body cord is also necessary to register scoring: it attaches to the weapon and is worn inside the sleeve of the normal jacket, down the fencer's back and is then attached to the scoring box. In sabre and foil, the body cord is connected to the lamé in order to create a circuit to the scoring box, where another part of the body cord attaches, can record where one has been hit.

Traditionally, the fencers' uniform is white in color (black being the traditional color for instructors). This may be to some extent due to the occasional pre-electric practice of covering the point of the weapon in dye, soot, or colored chalk in order to make it easier for the referee to determine the placing of the touches. Recently the FIE rules have been relaxed to allow colored uniforms (black still being reserved for the coaches). The guidelines delineating the permitted size and positioning of sponsorship logos are however still extremely strict.

Practice and techniques

Competition formats

Fencing Tournament. (Note the grounded conductive strips on the floor.)

Fencing tournaments are varied in their format, and there are both individual and team competitions. A tournament may comprise all three weapons, both individual and team, or it may be very specific, such as an Épée Challenge, with individual épée only. And, as in many sports, men and women compete separately in high-level tournaments. Mixed-gender tournaments are commonplace at lower-level events, especially those held by individual fencing clubs. There are two types of event, individual and team. An individual event consists of two parts: the pools, and the direct eliminations.

In the pools, fencers are divided into groups, and every fencer in a pool will have the chance to fence every other fencer once. There are typically seven fencers in a pool. If the number of fencers competing is not a multiple of seven, then there will usually be several pools of six or eight. After the pools are finished, the fencers are given a ranking, or "seed," compared to all other fencers in the tournament, based primarily on the percent of bouts they won, then based secondarily on the difference between the touches they scored and the touches they received. Once the seeds have been determined, the direct elimination round starts. Fencers are sorted in a table of some power of 2 (16, 32, 64, etc.) based on how many people are competing. Due to the fact that it is highly unlikely for the number of fencers to be exactly a power of two, the fencers with the best results in the pools are given byes or the bottom seeded fencers are eliminated. The winner carries on in the tournament, and loser is eliminated. Typically no one has to fence for third place (the exception is if the tournament is a qualifying tournament with limited slots for continuation). Instead, two bronze medals are given to the losers of the semi-final round.

Team competition involves teams of three fencers. A fourth fencer can be allowed on the team as an alternate, but as soon as the fourth has been subbed in, they cannot substitute again. The modern team competition is similar to the pool round of the individual competition. The fencers from opposing teams will each fence each other once, making for a total of nine matches. Matches between teams are three minutes long, or to 5 points, and the points then carry onto the next bout, thus making it a forty-five touch bout fought by six fencers. Unlike individual tournaments, team tournaments almost always fence for bronze.

Kendo

2009-03-04T22:35:00.000-08:00

Kendo (剣道 ,kendō), meaning "Way of the Sword", is a modern Japanese martial art of sword-fighting based on traditional Japanese swordsmanship, or Kenjutsu.

Kendo is a physically and mentally challenging activity that combines strong martial arts values with sport-like physical elements.

Practitioners

Practitioners of kendo are called kendōka (剣道家 ), meaning "one who practices kendo", or occasionally kenshi (剣士 ), meaning "swordsman".

There are estimates that about six million people world-wide practice Kendo, with approximately four million in Japan, one million in Korea, and more in Europe and the United States. The "Kodansha Meibo" (a register of dan graded members of the All Japan Kendo Federation) shows that as of January 2003, there were 1.3 million registered dan graded kendoka in Japan. The number of kendoka not yet graded to a dan level is not included: those kendoka would outnumber considerably the dan graded players.

Equipment and clothing

Bōgu set.

A shinai.

Armour and clothing components

Kendo is practiced wearing traditional Japanese clothing and armour ぼうぐ (防具 , bōgu), using one, or less commonly two shinai. The shinai is meant to represent a Katana, and is made up of four bamboo slats, which are held together by leather fittings. Kendoka also use wooden swords ぼくとう (木刀 , bokutō) to practice kata. The footwork and the strikes in Kendo are very different from European fencing as the design and balance of the weapon is significantly different. Kendo employs strikes involving both the edge and tip of the shinai.

Protective armour is worn to protect specified target areas on the head, arms and body. The head is protected by a stylised helmet めん (面 , men) with a metal grill to protect the face and a hard leather flap to protect the throat. The forearm, wrist, and hand are protected by long, thickly padded fabric gauntlets こて (小手 , kote). The body is protected by a wooden breastplate どう (胴 , dō) and three vertical fabric fauldsたれ (垂れ , tare). The clothing worn under the bōgu comprise a jacket (kendogi or keikogi) and a hakama, which is a skirt-like garment separated in the middle to form two wide trouser legs. A cotton towel てぬぐい (手拭い , tenugui) is wrapped around the head, under the men, to absorb perspiration and provides a base for the men to fit comfortably. Like some other martial arts, kendoka train and fight barefoot.

Modern practice

Kendo training is quite noisy in comparison to other martial arts or sports. This is because kendōka use a shout, or kiai きあい (気合い ), to express their fighting spirit when striking. Additionally, kendōka execute fumikomi-ashi (踏み込み足 ,ふみこみあし), a stomp of the front foot, when making a strike. Kendo is ideally practiced in a purpose-built dōjō, though standard sports halls and other venues are often used. An appropriate venue has a clean and well-sprung wooden floor, suitable for fumikomi-ashi. Modern kendo techniques comprise both strikes and thrusts. Strikes are only made towards specified target areas だとつ-ぶい (打突-部位 , datotsu-bui) on the wrists, head or body, all of which are protected by armour. The targets are men, sayu-men or yoko-men (upper left or right side of the men), the right kote at any time, the left kote when it is in a raised position, and the left or right side of the dō. Thrusts つき (突き ^?, tsuki) are only allowed to the throat. However, since an incorrectly performed thrust could cause serious injury to the opponent's neck, thrusting techniques in free practice and competition are often restricted to senior dan graded kendoka.

Kendoka perform sonkyo after combat.

Two kendoka in tsuba zeriai.

Kendo target points, or datotsu-bui.

Two kendoka, one (left) is playing in nitō (two sword style) and the other (right) is playing in ittō (one sword style).

Once a kendoka begins practice in armour, a practice session may include any or all of the following types of practice.

Kiri-kaeshi (切-返し ,きり-かえし): Striking the left and right men target points in succession, practising centering, distance, and correct technique, while building spirit and stamina.
Waza-geiko (技-稽古 ,わざ-げいこ): waza or technique practice in which the student learns and refines that techniques of Kendo with a receiving partner.
Kakari-geiko (掛-稽古 ,かかり-げいこ): short, intense, attack practice which teaches continuous alertness and readiness to attack, as well as building spirit and stamina.
Ji-geiko (地-稽古 ,じ-げい): undirected practice where the kendoka tries all that has been learnt during practice against an opponent.
Gokaku-geiko (互角-稽古 ,ごかく-げいこ): practice between two kendoka of similar skill level.
Hikitate-geiko (引立-稽古 ,ひきたて-げいこ): practice where a senior kendoka guides a junior through practice.
Shiai-geiko (試合-稽古 ,しあい-げいこ): competition practice which may also be judged.

Competition

In competition しあい (試合 , shiai), a point ゆこ-だとつ (有効-打突 yuko-datotsu) is only awarded, in principle, when the attack is made to a target area with Ki, Ken, Tai-Ichi (気剣体-一致), or spirit, sword and body as one. For an attack to be successful, the shinai must strike the specified target soundly, the contact by the shinai must happen simultaneously with the attacker's front foot connecting with floor, and the kendoka must execute a spirited and convincing kiai in coordination with the strike. For a strike to be deemed sound, the point of contact must fall within the top third of the shinai, and the direction of movement of the shinai must be technically correct. Finally, zanshin (残心 ,ざんしん), or continuation of awareness, must be present and shown throughout the execution of the strike, and the kendoka must be ready to attack again.

In competition, there are usually three referees しんぱん (審判 , shinpan). Each referee holds a red flag and a white flag in opposing hands. To award a point, a referee raises the flag corresponding to the colour of the ribbon worn by the scoring competitor. Usually at least two referees must agree for a point to be awarded. The match continues until a pronouncement of the point that has been scored.

The first competitor to score two points wins the match. If the time limit is reached and only one competitor has a point, that competitor wins.

In the case of a tie, there are several options:

Hiki-wake (引き分け ,ひきわけ): The match is declared a draw.
Enchō (延長 ,えんちょう): The match is continued until either competitor scores a point.
Hantei (判定 ,はんてい): The victor is decided by the referees. The three referees vote for victor by each raising one of their respective flags simultaneously.

Grades

Technical achievement in kendo is measured by advancement in grade, rank or level. The kyū (級 ,きゅう) and dan (段 grading system is used to indicate one's proficiency in kendo. The dan levels are from first-dan しょだん (初段 , sho-dan) to tenth-dan じゅうだん (十 , jū-dan). There are usually six grades below first-dan, known as kyu. The kyu numbering is in reverse order, with first kyu いっきゅう (一級 , ikkyū) being the grade immediately below first dan, and sixth kyu ろっきゅう (六級 , rokkyū) being the lowest grade.

Eighth-dan はちだん (八段 , hachi-dan) is the highest dan grade attainable through a test of physical kendo skills. In the AJKF the grades of ninth-dan きゅうだん (九段 , kyū-dan) and tenth-dan are no longer awarded, but ninth-dan kendoka are still active in Japanese kendo. International Kendo Federation grading rules allow national kendo organisations to establish a special committee to consider the award of those grades.

All candidates for examination face a panel of examiners. A larger, more qualified panel is usually assembled to assess the higher dan grades.

Kendo examinations typically consist of a demonstration of the skill of the applicants and for some dan grades, also a written exam. The eighth-dan kendo exam is extremely difficult, with a reported pass rate of less than 1 percent.

There are no visible differences in dress between kendo grades; those below dan-level may dress the same as those above dan-level.

Kata

There are 10 Nihon Kendo Kata にほんけんどうかた (日本剣道形). These are performed with wooden swords ぼくとう (木刀 , bokutō). The kata include fundamental techniques of attacking and counter-attacking, and have useful practical application in general kendo. Occasionally, real swords or swords with a blunt edge, called kata-yoかたよ (形容 ) or ha-biki はびき (刃引 ), may be used for display of kata.

Nihon Kendo Kata

Kata one through seven are performed with both partners using a daitō (大刀 ) or tachi (太刀 ) style bokutō of around 102 cm. Kata 8–10 are performed with one partner using a daitō and the other using a kodachi こだち (小太刀 ) or shōtō しょうとう (小刀 ) style bokutō of around 55cm. During kata practice, the participants take the roles of either uchidachi うちだち (打太刀 ), the teacher, or shidachi 仕太刀 (しだち ), the student. The uchidachi makes the first move or attack in each kata. As this is a teaching role, the uchidachi is always the 'losing' side, thus allowing the shidachi to learn and gain confidence.

Nihon kendo kata were drawn from representative kenjutsu schools and tend to be quite deep and advanced In some areas the regular training curriculum does not include nihon kendo kata.

In 2003, the introduction of Bokuto Ni Yoru Kendo Kihon-waza Keiko-ho (木刀による剣道基本技稽古法), a set of basic exercises using a bokuto, attempted to bridge this gap. This form of practice, is intended primarily for kendoka up to second dan にだん (二 ), but is very useful for all kendo students.

Outside Japan

The International Kendo Federation (FIK) was founded in 1970, it is an international federation of national and regional kendo associations and the world governing body for kendo. The FIK is a non-governmental organisation, and its aim is to promote and popularise kendo, iaido and jodo.

Seventeen national or regional federations were the founding affiliates. The number of affiliated and recognised organisations has increased over the years to 50 affiliates by February 2009.

Chinese martial arts

2009-03-03T06:03:00.000-08:00

Kung fu and wushu are popular terms that have become synonymous with Chinese martial arts. However, the Chinese terms kung fu (Chinese: 功夫 pinyin: gōngfū) and wushu (traditional Chinese: 武術; simplified Chinese: 武术; pinyin: wǔshù) have very different meanings. In Chinese, kung fu can be used in contexts completely unrelated to martial arts, and refers colloquially to any individual accomplishment or skill cultivated through long and hard work . In contrast, wushu is a more precise term for general martial art activities. The term wushu has also become the name for a modern sport similar to gymnastics, involving the performance of adapted Chinese bare-handed and weapons forms (tàolù 套路) judged to a set of contemporary aesthetic criteria for points.

Styles

The Yang style of Taijiquan being practiced on the Bund in Shanghai

China has one of the longest histories of continuously recorded martial arts tradition of any

society in the world, and with hundreds of styles probably the most varied. Over the past two to four thousand years, many distinctive styles have been developed, each with its own set of techniques and ideas. There are also common themes to the different styles, which are often classified by "families" (家, jiā), "sects" (派, pai) or "schools" (門, men) of martial art styles. There are styles that mimic movements from animals and others that gather inspiration from various Chinese philosophies, myths and legends. Some styles put most of their focus into the harnessing of qi energy, while others concentrate solely on competition and exhibition. Each style offers a different approach to the common problems of self-defense, health and self-cultivation.

Chinese martial arts can be split into various categories to differentiate them: For example,

external (外家拳) and internal (内家拳). Chinese martial arts can also be categorized by location, as in northern (北拳) and southern (南拳) as well, referring to what part of China the styles originated from, separated by the Yangtze River (Chang Jiang); Chinese martial arts may even be classified according to their province or city. The main perceived difference about northern and southern styles is that the northern styles tend to emphasize fast and powerful kicks, high jumps and generally fluid and rapid movement, while the southern styles focus more on strong arm and hand techniques, and stable, immovable stances and fast footwork. Examples of the northern styles include Changquan and Xingyiquan. Examples of the southern styles include Bak Mei and Wing Chun. Chinese martial arts can also be divided according to religion, imitative-styles (象形拳), and more. There are distinctive differences in the training between different groups of the Chinese martial arts regardless of the type of classification.

Training

Chinese martial arts training consists of the following components: basics, forms, applications and weapons. Each style has its own unique training system with varying emphasis on each of those components. In addition, philosophy, ethics and even medical practice are highly regarded by most Chinese martial arts. A complete training system should also provide insight into Chinese attitudes and culture.

Basics

Basics (基本功) are a vital part of the training, as a student cannot progress to the more advanced stages without them; without strong and flexible muscles including the management of the concept of "Chi" (breath, or energy) and proper body mechanics, many movements of Chinese martial arts are simply impossible to perform correctly. Basics training may involve a series of simple movements that are performed repeatedly over a short interval; examples of these basics training include stretching, stance work, rudimentary conditioning, meditation and

basic kicking and punching techniques.

A common saying concerning basic training in Chinese martial arts is as follows:

内外相合，外重手眼身法步，内修心神意气力。

Which can be translated as

Train both Internal and External.

External training includes the hands, the eyes, the body and stances.

Internal training includes the heart, the spirit, the mind, breathing and strength.

Stances

Stances (steps or 步法) are structural postures employed in Chinese martial arts training.

They represent the foundation and exaggerated form of a fighter's base. Each style has different names and variations for each stance. Stances may be differentiated by foot position, weight distribution, body alignment, etc. Stance training can be practiced statically, the goal of which is to maintain the structure of the stance through a set time period, or dynamically, in which case a series of movements is performed repeatedly. The horse riding stance (骑马步，马步 qí mǎ bù,mǎ bù) and the bow stance are examples of stances found in many styles of Chinese martial arts.

Meditation

In many Chinese Martial Art systems, meditation is considered to be an important component of basic training. Meditation can be used to develop focus, mental clarity and can act as a basis for qigong training.

Forms

Forms or taolu (Chinese: 套路; pinyin: tào lù) in Chinese are series of predetermined movements combined so they can be practiced as one linear set of movements. Forms were originally intended to preserve the lineage of a particular style branch, and were often taught to advanced students who were selected to preserve the art's lineage. Forms were designed to contain both literal, representative and exercise-oriented forms of applicable techniques which would be extracted, tested and trained by students through sparring sessions.

Many believe that a Kung Fu form needs to be both practical, usable, and applicable as well as promoting flow, meditation, flexibility, balance and coordination. Often kung fu teachers are heard to say "train your form as if you were sparring and spar as if it were a form."

Types

There are two general types of forms in Chinese Martial Arts. Most common are "solo forms" which are performed by a single student. There are also "sparring" forms, which are choreographed fighting sets performed by two or more people. Sparring forms were designed both to acquaint beginning fighters with basic measures and concepts of combat, and to serve as performance pieces for the school. Sparring forms which utilize weapons are especially useful for teaching students the extension, range and technique required to manage a weapon. Today many styles of Kung Fu, as well as styles of Wushu, consider forms to be one of the most important practices in Chinese Martial Arts. Traditionally, forms played a smaller role in training combat application, and were eclipsed by sparring, drilling and conditioning. Forms gradually build up a practitioner's flexibility, internal and external strength, speed and stamina, and teach balance and coordination. Many styles contain forms using a wide range of weapons of various length and type, utilizing one or two hands. There are also styles which focus on a certain type of weapon.

Modern forms

Wushu

Modern forms are used in the sport wushu, as seen in this staff routine

As forms have grown in complexity and quantity over the years, and many forms alone could be practiced for a lifetime, styles of modern Chinese martial arts have developed that concentrate solely on forms, and do not practice application at all. These styles are primarily aimed at exhibition and competition, and often include more acrobatic jumps and movements added for enhanced visual effect compared to the traditional styles. Those who generally prefer to practice traditional styles, focused less on exhibition, are often referred to as traditionalists. Many traditionalists consider the evolution of today's Chinese martial arts as undesirable, saying that much of its original value is lost.

Controversy of modern form work

Even though forms in Chinese martial arts are intended to depict realistic martial techniques, the movements are not always identical to how techniques would be applied in combat. Many forms have been elaborated upon, on the one hand to provide better combat preparedness, and on the other hand to look more aesthetically pleasing. One manifestation of this tendency toward elaboration which goes beyond combat application is the use of lower stances and higher, stretching kicks. These two maneuvers are unrealistic in combat and are utilized in forms for exercise purposes. Many modern schools have replaced practical defense or offense movements with acrobatic feats that are more spectacular to watch, thereby gaining favor during exhibitions and competitions. This has led to criticisms by traditionalists for endorsing the more acrobatic, show-oriented Wushu competition, even though appearance has always been important in many traditional forms as well. Historically forms were often performed for entertainment purposes long before the advent of modern Wushu as practitioners have looked for supplementary income by performing on the streets or in theaters.

Many traditional Chinese Martial Artists, as well as practitioners of modern sport combat, have become critical of the perception that forms work is more relevant to the art than sparring and drill application, while most continue to see traditional forms practice within the traditional context--as vital to both proper combat execution, the Shaolin aesthetic as art form, as well as upholding the meditative function of the physical artform.

Another reason why the martial techniques often appear different in forms when contrasted with sparring application is thought by some to come from the concealment of the actual functions of the techniques from outsiders.

Application

Application training refers to the training of putting the martial techniques to use. Chinese martial arts usually contain a large arsenal of techniques and make use of the whole body; efficiency and effectiveness is what the techniques are based on.^[50]^[51]^[52] When and how applications are taught varies from style to style; in the early stages of a student's training, most styles focus on drills in which each student knows what range of combat is being practiced and what attack to expect. Gradually, fewer and fewer rules are applied, and the students learn how to react and utilize technique. 'Sparring' refers to the major aspect of application training, which simulates a combat situation but usually includes rules and regulations to reduce the chance of serious injury to the students.

The subject of application training is a controversial one, and is the subject of a raging debate between the Neo-Traditional Martial Artists and Sports and traditional martial artists. In the neo-traditionalist view, martial arts training should eventually lead to and be proven by actual combat as well as being governed by a moral philosophy; neo-traditionalists often believe sparring to test techniques is either irrelevant because of their disbelief in the validity of a regulated test setting, or because the system's techniques are supposedly too dangerous to use outside of a real combat situation. In contrast, the sport-competition and traditionalist view suggests that all of the techniques in Chinese Martial Arts should be repeatedly time-tested through sparring to insure their effectiveness.

An example of this approach in the Chinese Martial Arts is the tradition of Lei tai (擂臺/擂台, raised platform fighting) and Sanda (散打) or sǎnshǒu (散手). Lèitái represents public challenge matches that first appeared in the Song Dynasty. The objective for those contests was to knock the opponent from a raised platform by any means necessary. San Shou and Sanda represents the modern development of Lei Tai contests, but with rules in place to reduce the chance of serious injury. Many Chinese martial arts schools teach or work within the rulesets of San Shou and Sanda, working to incorporate the movements, characteristics, and theory of their style.

Weapons training

Most Chinese styles also make use of training the broad arsenal of Chinese weapons for conditioning the body as well as coordination and strategy drills.^[56] Weapons training (qìxiè 器械) are generally carried out after the student is proficient in the basics, forms and applications training. The basic theory for weapons training is to consider the weapon as an extension of your body. The same requirements for footwork and body coordination is required The process of weapon training proceed with forms, forms with partners and then applications. Most systems have training methods for each of the Eighteen Arms of Wushu (shíbābānbīngqì 十八般兵器) in addition to specialized instruments specific to the system.

Martial arts and morality

Traditional Chinese schools of martial arts, such as the famed Shaolin monks, often dealt with the study of martial arts not just as a means of self-defense or mental training, but as a system of ethics.^[58]^[59] Wude (武德) can be translated as "martial morality" and is constructed from two Chinese characters, "wu" (武) which means martial and "de" (德) which means morality. Wude (武德) deals with two aspects; "morality of deed" and "morality of mind". Morality of deed concerns social relations; morality of mind is meant to cultivate the inner harmony between the emotional mind (Xin, 心) and the wisdom mind (Hui, 慧). The ultimate goal is reaching no extremity (Wuji, 無極) (closely related to the Taoist concept of wu wei), where both wisdom and emotions are in harmony with each other.

Japanese Style Sports

2009-03-03T05:11:00.000-08:00

Karate

karate-do (空手道 ), pronounced /kaɺate̞/ and often mispronounced /kaɺatiː/, is a martial art developed in the Ryukyu Islands from indigenous fighting methods and Chinese kenpō. It is primarily a striking art using punching, kicking, knee and elbow strikes and open-handed techniques such as knife-hands and ridge-hands. Grappling, locks, restraints, throws, and vital point strikes are taught in some styles. A karate practitioner is called a karateka.

Sport

A Karateka executing a flying side kick

Gichin Funakoshi (船越義珍) said, "There ar

e no contests in karate." In pre-World War II Okinawa, kumite was not part of karate training. Shigeru Egami relates that, in 1940, some karateka were ousted from their dojo because they adopted sparring after having learned it in Tokyo.

International competition is well organized. The World Karate Federation (WKF) is recognized by the International Olympic Committee (IOC) as being responsible for karate competition in the Olympic games. The WKF has developed common rules governing all styles. The national WKF organisations coordinate with their respective National Olympic Committees.

Karate does not have 2012 Olympic status. In the 117th IOC Session (July 2005), karate received more than half of the votes, but not the two-thirds majority needed to become an official Olympic sport.

WKF karate competition has two disciplines: sparring (kumite) and forms (kata) Competitors may enter either as individuals or as part of a team. Evaluation for kata and kobudō is performed by a panel of judges, whereas sparring is judged by a head referee, usually with assistant referees at the side of the sparring area. Sparring matches are typically divided by weight, age, gender, and experience.

There are other regional, national, and international organizations that hold competitions. The WKF accepts only one organization per country. The World Union of Karate-do Organizations (WUKO) offers different styles and federations a world body they may join, without having to compromise their style or size. The WUKO accepts more than one federation or association per country.

Rank

A young student graduates up a rank in belt in front of his dojo.

In 1924 Gichin Funakoshi, founder of Shotokan Karate, adopted the Dan system from judo founder Jigoro Kano^[19] using a rank scheme with a limited set of belt colors. Other Okinawan teachers also adopted this practice. In the Kyū/Dan system the beginner grades start with a higher numbered kyū (e.g., 9th Kyū) and progress toward a lower numbered kyū. The Dan progression continues from 1st Dan (Shodan, or 'beginning dan') to the higher dan grades. Kyū-grade karateka are referred to as "color belt" or mudansha ("ones without dan"). Dan-grade karateka are referred to as y

udansha (holders of dan rank). Yudansha typically wear a black belt. Requirements of rank differ among styles, organizations, and schools. Kyū ranks stress stance, balance, and coordination.

Speed and power are added at higher grades. Minimum age and time in rank are factors affecting promotion. Testing consists of demonstration of techniques before a panel of examiners. This will vary by school, but testing may include everything learned at that point, or just new information. The demonstration is an application for new rank (shinsa) and may include kata, bunkai, self-defense, routines, tameshiwari (breaking), and/or kumite (sparring). Black belt testing may also include a written examination.

Jujutsu

literally meaning the "art of softness", or "way of yielding" is a collective name for Japanese martial art styles including unarmed and armed techniques. Jujutsu evolved among the samurai of feudal Japan as a method for defeating an armed and armored opponent without weapons. Due to the ineffectiveness of striking against an armored opponent, the most efficient methods for neutralizing an enemy took the form of pins, joint locks, and throws. These techniques were developed around the principle of using an attacker's energy against him, rather than directly opposing it.

There are many variations of the art, which leads to a diversity of approaches. Jujutsu schools (ryū) may utilize all forms of grappling techniques to some degree (i.e. throwing, trapping, joint locking, holds, gouging, biting, disengagements, striking, and kicking). In addition to jujutsu, many schools taught the use of weapons.

Today, jujutsu is still practiced both as it was hundreds of years ago, but also in modified forms for sport practice. Derived sports forms include the Olympic sport and martial art of judo, which was developed from several traditional styles of jujutsu by Kano Jigoro in the late 19th century; and Brazilian Jiu-Jitsu, which was in turn derived from earlier version (pre World War II) of Kodokan judo.

Description

Japanese jujutsu systems typically place more emphasis on throwing, immobilizing and pinning, joint-locking, choking, and strangling techniques as compared with other martial arts systems such as karate. Atemi-waza (striking techniques) were seen as less important in most older Japanese systems, since samurai body armor protected against many striking techniques. The Chinese quanfa/ch'uan-fa (kenpo or kung fu) systems focus on punching, striking, and kicking more than jujutsu.

The Japanese systems of hakuda, kenpo, and shubaku display some degree of Chinese influence in their emphasis on atemi-waza. In comparison, systems that derive more directly from Japanese sources show less preference for such techniques. However, a few jujutsu schools likely have some Chinese influence in their development. Jujutsu ryu vary widely in their techniques, and many do include significant numbers of striking techniques, if only as set-ups for their grappling techniques.

In jujutsu, practitioners train in the use of many potentially fatal moves. However, because students mostly train in a non-competitive environment, risk is minimized. Students are taught break falling skills to allow them to safely practice otherwise dangerous throws.

In jujutsu, there are five main sectors ("arts") of training. The first, the Art of Blocking, is used to defend against attacks. The second, the Art of the Fulcrum Throw, is employed in modern judo. The third, the Art of the Non-fulcrum Throw is employed through throws that involve little or no contact with the opponent. The fourth, the Art of Escaping (Hakko-Dori), is very crucial in many styles of Jujutsu. The fifth, the Art of Striking (Atemi-Waza), is used more by modern jujutsuka (jujutsu practitioners) who do not employ body armor.

Technical characteristics

As a "soft" art, jujitsu systems generally employ the principles of balance, leverage, and momentum to overcome opponents. This is in contrast to "hard" systems (for example, some styles of karate or Taekwon-do) that tend to emphasize developing power, strength, and speed. Although there is some diversity in the actual look and techniques of the various traditional jujutsu systems, there are significant technical similarities common to all schools:

Students learn traditional jujutsu primarily by observation and imitation of the ryu's waza.
The unarmed waza of most schools emphasize joint-locking techniques (kansetsu waza), that is, threatening a joint's integrity by placing pressure on it in a direction contrary to its normal function, aligning it so that muscular strength cannot be brought to bear, take-down or throwing techniques, or a combination of take-downs and joint-locks.
Sometimes, atemi (strikes) are targeted to some vulnerable area of the body; this is an aspect of kuzushi, the art of breaking balance as a set-up for a lock, take-down or throw.
Movements tend to capitalize on an attacker's momentum and openings in order to place a joint in a compromised position or to break their balance as preparation for a take-down or throw.
The defender's own body is positioned so as to take optimal advantage of the attacker's weaknesses while simultaneously presenting few openings or weaknesses of its own.
Weapons training was a primary goal of Samurai training. Koryu (old/classic) schools typically include the use of weapons. Weapons might include the roku shaku bo (six-foot staff), hanbo (three-foot staff), katana (sword), wakizashi or kodachi (short sword), tanto (knife), or jitte (short one hook truncheon).

Aikido

is a Japanese martial art developed by Morihei Ueshiba as a synthesis of his martial studies, philosophy, and religious beliefs. Aikido is often translated as "the Way of unifying (with) life energy"or as "the Way of harmonious spirit."Ueshiba's goal was to create an art that practitioners could use to defend themselves while also protecting their attacker from injury.

Aikido is performed by blending with the motion of the attacker and redirecting the force of the attack rather than opposing it head-on. This requires very little physical energy, as the aikidōka (aikido practitioner) "leads" the attacker's momentum using entering and turning movements. The techniques are completed with various throws or joint locks. Aikido can be categorized under the general umbrella of grappling arts.

Aikido derives mainly from the martial art of Daitō-ryū Aiki-jūjutsu, but began to diverge from it in the late 1920s, partly due to Ueshiba's involvement with the Ōmoto-kyō religion. Ueshiba's early students' documents bear the term aiki-jūjutsu. Many of Ueshiba's senior students have different approaches to aikido, depending on when they studied with him. Today aikido is found all over the world in a number of styles, with broad ranges of interpretation and emphasis. However, they all share techniques learned from Ueshiba and most have concern for the well-being of the attacker. This attitude has been at the core of criticisms of aikido and related arts.

Training

In aikido, as in virtually all Japanese martial arts, there are both physical and mental aspects of training. The physical training in aikido is diverse, covering both general physical fitness and conditioning, as well as specific techniques. Because a substantial portion of any aikido curriculum consists of throws, the first thing most students learn is how to safely fall or roll. The specific techniques for attack include both strikes and grabs; the techniques for defense consist of throws and pins. After basic techniques are learned, students study freestyle defense against multiple opponents, and in certain styles, techniques with weapons.

Fitness

Physical training goals pursued in conjunction with aikido include controlled relaxation, flexibility, and endurance, with less emphasis on strength training. In aikido, pushing or extending movements are much more common than pulling or contracting movements. This distinction can be applied to general fitness goals for the aikido practitioner.

Certain anaerobic fitness activities, such as weight training, emphasize contracting movements. In aikido, specific muscles or muscle groups are not isolated and worked to improve tone, mass, and power. Aikido-related training emphasizes the use of coordinated whole-body movement and balance similar to yoga or pilates. For example, many dojo begin each class with warm-up exercises (準備体操 ,junbi taisō), which may include stretching and break falls.

Roles of uke and nage

Aikido training is based primarily on two partners practicing pre-arranged forms (kata) rather than freestyle practice. The basic pattern is for the receiver of the technique (uke) to initiate an attack against the thrower (投げ nage, also referred to as 取り tori, or 仕手 shite, depending on aikido style), who neutralises this attack with an aikido technique.

Both halves of the technique, that of uke and that of nage, are considered essential to aikido training. Both are studying aikido principles of blending and adaptation. Nage learns to blend with and control attacking energy, while uke learns to become calm and flexible in the disadvantageous, off-balance positions in which nage places them. This "receiving" of the technique is called ukemi. Uke continuously seeks to regain balance and cover vulnerabilities (e.g., an exposed side), while nage uses position and timing to keep uke off-balance and vulnerable. In more advanced training, uke will sometimes apply reversal techniques (返し技 ,kaeshi-waza) to regain balance and pin or throw nage.

Ukemi (受身 ) refers to the act of receiving a technique. Good ukemi involves a parry or breakfall that is used to avoid pain or injury, such as joint dislocations or atemi.

Initial attacks

Aikido techniques are usually a defense against an attack; therefore, to practice aikido with their partner, students must learn to deliver various types of attacks. Although attacks are not studied as thoroughly as in striking-based arts, "honest" attacks (a strong strike or an immobilizing grab) are needed to study correct and effective application of technique.

Many of the strikes (打ち ,uchi) of aikido are often said to resemble cuts from a sword or other grasped object, which may suggest origins in techniques intended for armed combat. Other techniques, which appear to explicitly be punches (tsuki), are also practiced as thrusts with a knife or sword. Kicks are generally reserved for upper-level variations; reasons cited include that falls from kicks are especially dangerous, and that kicks (high kicks in particular) were uncommon during the types of combat prevalent in feudal Japan. Some basic strikes include:

Front-of-the-head strike (正面打ち ,shōmen'uchi) a vertical knifehand strike to the head.
Side-of-the-head strike (横面打ち ,yokomen'uchi) a diagonal knifehand strike to the side of the head or neck.
Chest thrust (胸突き ,mune-tsuki) a punch to the torso. Specific targets include the chest, abdomen, and solar plexus. Same as "middle-level thrust" (中段突き ,chūdan-tsuki), and "direct thrust" (直突き ,choku-tsuki).
Face thrust (顔面突き ,ganmen-tsuki) a punch to the face. Same as "upper-level thrust" (上段突き ,jōdan-tsuki).

Beginners in particular often practice techniques from grabs, both because they are safer and because it is easier to feel the energy and lines of force of a hold than a strike. Some grabs are historically derived from being held while trying to draw a weapon; a technique could then be used to free oneself and immobilize or strike the attacker who is grabbing the defender. The following are examples of some basic grabs:

Single-hand grab (片手取り ,katate-dori) one hand grabs one wrist.
Both-hands grab (諸手取り ,morote-dori) both hands grab one wrist.
Both-hands grab (両手取り ,ryōte-dori) both hands grab both wrists. Same as "double single-handed grab" (両片手取り ,ryōkatate-dori).
Shoulder grab (肩取り ,kata-dori) a shoulder grab. "Both-shoulders-grab" is ryōkata-dori (両肩取り )
Chest grab (胸取り ,mune-dori) grabbing the (clothing of the) chest. Same as "collar grab" (襟取り ,eri-dori).

Basic techniques

Diagram of ikkyō, or "first technique". Yonkyō has a similar mechanism of action, although the upper hand grips the forearm rather than the elbow.

The following are a sample of the basic or widely practiced throws and pins. The precise terminology for some may vary between organisations and styles, so what follows are the terms used by the Aikikai Foundation. Note that despite the names of the first five techniques listed, they are not universally taught in numeric order.

First technique (一教 ,ikkyō) a control using one hand on the elbow and one hand near the wrist which leverages uke to the ground. This grip also applies pressure into the ulnar nerve at the wrist.
Second technique (二教 ,nikyō) a pronating wristlock that torques the arm and applies painful nerve pressure. (There is an adductive wristlock or Z-lock in ura version.)
Third technique (三教 ,sankyō) a rotational wristlock that directs upward-spiraling tension throughout the arm, elbow and shoulder.
Fourth technique (四教 ,yonkyō) a shoulder control similar to ikkyō, but with both hands gripping the forearm. The knuckles (from the palm side) are applied to the recipient's radial nerve against the periosteum of the forearm bone.
Fifth technique (五教 ,gokyō) visually similar to ikkyō, but with an inverted grip of the wrist, medial rotation of the arm and shoulder, and downward pressure on the elbow. Common in knife and other weapon take-aways.
Four-direction throw (四方投げ ,shihōnage) The hand is folded back past the shoulder, locking the shoulder joint.
Forearm return (小手返し ,kotegaeshi) a supinating wristlock-throw that stretches the extensor digitorum.
Breath throw (呼吸投げ ,kokyūnage) a loosely used term for various types of mechanically unrelated techniques, although they generally do not use joint locks like other techniques.
Entering throw (入身投げ ,iriminage) throws in which nage moves through the space occupied by uke. The classic form superficially resembles a "clothesline" technique.
Heaven-and-earth throw (天地投げ ,tenchinage) beginning with ryōte-dori; moving forward, nage sweeps one hand low ("earth") and the other high ("heaven"), which unbalances uke so that he or she easily topples over.
Hip throw (腰投げ ,koshinage) aikido's version of the hip throw. Nage drops his or her hips lower than those of uke, then flips uke over the resultant fulcrum.
Figure-ten throw (十字投げ ,jūjinage) or figure-ten entanglement (十字絡み ,jūjigarami) a throw that locks the arms against each other (The kanji for "10" is a cross-shape: 十).
Rotary throw (回転投げ ,kaitennage) nage sweeps the arm back until it locks the shoulder joint, then uses forward pressure to throw.

Implementations

Diagram showing two versions of the ikkyō technique: one moving forward (the omote version) and one moving backward (the ura version). See text for more details.

Aikido makes use of body movement (tai sabaki) to blend with uke. For example, an "entering" (irimi) technique consists of movements inward towards uke, while a "turning" (転換 ,tenkan) technique uses a pivoting motion. Additionally, an "inside" (内 ,uchi) technique takes place in front of uke, whereas an "outside" (外 ,soto) technique takes place to his side; a "front" (表 ,omote) technique is applied with motion to the front of uke, and a "rear" (裏 ,ura) version is applied with motion towards the rear of uke, usually by incorporating a turning or pivoting motion. Finally, most techniques can be performed while in a seated posture (seiza). Seated techniques are called suwari-waza.

Thus, from fewer than twenty basic techniques, there are thousands of possible implementations. For instance, ikkyō can be applied to an opponent moving forward with a strike (perhaps with an ura type of movement to redirect the incoming force), or to an opponent who has already struck and is now moving back to reestablish distance (perhaps an omote-waza version). Specific aikido kata are typically referred to with the formula "attack-technique(-modifier)". For instance, katate-dori ikkyō refers to any ikkyō technique executed when uke is holding one wrist. This could be further specified as katate-dori ikkyō omote, referring to any forward-moving ikkyō technique from that grab.

Atemi (当て身) are strikes (or feints) employed during an aikido technique. Some view atemi as attacks against "vital points" meant to cause damage in and of themselves. For instance, Gōzō Shioda described using atemi in a brawl to quickly down a gang's leader. Others consider atemi, especially to the face, to be methods of distraction meant to enable other techniques. A strike, whether or not it is blocked, can startle the target and break his or her concentration. The target may also become unbalanced in attempting to avoid the blow, for example by jerking the head back, which may allow for an easier throw. Many sayings about atemi are attributed to Morihei Ueshiba, who considered them an essential element of technique.

Weapons

Disarming an attacker using a "sword taking" (太刀取り tachi-dori) technique.

Weapons training in aikido traditionally includes the short staff (jō), wooden sword (bokken), and knife (tantō). Today, some schools also incorporate firearms-disarming techniques. Both weapon-taking and weapon-retention are sometimes taught, to integrate armed and unarmed aspects, although some schools of aikido do not train with weapons at all. Others, such as the Iwama style of Morihiro Saito, usually spend substantial time with bokken and jō, practised under the names aiki-ken, and aiki-jō, respectively. The founder developed much of empty handed aikido from traditional sword and spear movements, so the practice of these movements is generally for the purpose of giving insight into the origin of techniques and movements, as well as vital practice of these basic building blocks.

Multiple attackers and randori

Technique performed against two attackers.

One feature of aikido is training to defend against multiple attackers, often called taninzudori, or taninzugake. Freestyle (randori, or jiyūwaza) practice with multiple attackers is a key part of most curricula and is required for the higher level ranks. Randori exercises a person's ability to intuitively perform techniques in an unstructured environment. Strategic choice of techniques, based on how they reposition the student relative to other attackers, is important in randori training. For instance, an ura technique might be used to neutralise the current attacker while turning to face attackers approaching from behind.

In Shodokan Aikido, randori differs in that it is not performed with multiple persons with defined roles of defender and attacker, but between two people, where both participants attack, defend, and counter at will. In this respect it resembles judo randori.

Injuries

In applying a technique during training, it is the responsibility of nage to prevent injury to uke by employing a speed and force of application that is commensurate with their partner's proficiency in ukemi. Injuries (especially those to the joints), when they do occur in aikido, are often the result of nage misjudging the ability of uke to receive the throw or pin.

A study of injuries in the martial arts showed that while the type of injuries varied considerably from one art to the other, the differences in overall rates of injury were much less pronounced. Soft tissue injuries are one of the most common types of injuries found within aikido although a few deaths from repetitive "shihōnage" have been reported.

Mental training

Aikido training is mental as well as physical, emphasizing the ability to relax the mind and body even under the stress of dangerous situations. This is necessary to enable the practitioner to perform the bold enter-and-blend movements that underlie aikido techniques, wherein an attack is met with confidence and directness. Morihei Ueshiba once remarked that one "must be willing to receive 99% of an opponent's attack and stare death in the face" in order to execute techniques without hesitation.As a martial art concerned not only with fighting proficiency but also with the betterment of daily life, this mental aspect is of key importance to aikido practitioners.